INVENTORY NUMBER: E-7109
BABCOCK TENTER AND DRYING LINE:
YEAR: 1999
7-BAY, THERMAL-OIL AND ELECTRIC TYPE
WIDTH: 144 OR 3600mm, HORIZONTAL PIN CHAIN.
INCLUDING:
- 1 KRANTZ AMERICA UNWIND, MODEL CTR.UNW
- 1 KRANTZ AMERICA BEAM TRUCK, MODEL DBT, 180 LONG BEAM WIDTH
- 1 KRANTZ AMERICA FABRIC ACCUMULATOR WITH SEWING RAIL MODEL SEW,
3 BAR ACCUMULATOR 152 WIDE
- 1 MERROW SEWING HEAD, MODEL: 70-03B-2
- 1 BIANCO FABRIC SPREADER AND GUIDER MODEL DOGAL 04
- 1 BABCOCK PADDER MODEL 5805, WITH SPREADER BAR,
DIP TANK AND 2 RUBBER COVERED PAD ROLLS.
-1 STAINLESS STEEL STEAM TABLE WITH 2 BLOWERS
- 7-BAY DRYER WITH CIRCULATING THERMAL OIL HEATING SYSTEM.
-1 COOLING ZONE
-SELVEDGE GUM AND TRIM SYSTEMS WITH DRYERS
-1 MAHLO GRAVIMAT WEIGHT CONTROL SYSTEM
- 1 AUTOMATION PARTNERS STITCH COUNTER
-1 KRANTZ AMERICA WINDER MODEL A.BATCH, WITH TENSION ROLL ON
PNEUMATICALLY DRIVEN CYLINDER
- 1 KRANTZ BEAM TRUCK MODEL DBT
- 1 FULTON THERMAL OIL BOILER, MODEL FT-0800C, 1999,
OIL OR NATURAL GAS BIENERGY
BURNER, 8,000,000 BTU/HR CAPACITY, WITH ALL CONTROLS, TANKS PUMPS, ETC.
(CLICK HERE FOR PICTURES)
QUANTITY: 1
INVENTORY NUMBER: E-6831
KRANTZ TENTER FRAME:
MODEL D-5100
YEAR: 1991
80" WIDE
6 ZONE LO PROFILE GAS HEATED OVEN
COOLING ZONE
PAD
BIANCO GUIDER AT ENTRY
WEKO APPLICATOR
(CLICK HERE FOR PICTURES)
QUANTITY: 1
INVENTORY NUMBER: E-6765
BRUCKNER TENTER:
YEAR: 1975
4 CHAMBERS
4000 mm
GAS (TRANSFORMED BY INDUTHERM YEAR 1997)
WITH 4 BURNERS
HORIZONTAL PIN/CLIP CHAIN
MECHANICAL WEFT STRAIGHTENER (POSSIBLE CHANGE FOR AN ELECTRONIC)
PADDER OF 3400 mm
EXIT TO A-FRAME OR PLAITER
FREQUENCY VARIATOR ON THE EXIT
MACHINE HAS BEEN CHECKED , CLEANED, PAINTED, AND RUN BY TECHNICIANS.
(CLICK HERE FOR PICTURES)
QUANTITY: 1
INVENTORY NUMBER: E-6737
KRANTZ TENTER:
YEAR 1989 BUT FULLY OVERHAULLED
WIDTH: 3200mm
7 CHAMBERS
GAS HEATING
PIN + CLIP CHAIN
MAHLO WEFT STRAIGHTENER AT ENTRY AND DELIVERY
(CLICK HERE FOR PICTURES)
QUANTITY: 1
INVENTORY NUMBER: E-6486
SANTA LUCIA STENTERING - DRYING - HEAT SETTING PLANT:
YEAR: 2000
WORKING WIDTH 2400 mm
DESIGNED AS SINGLE LAYER STENTER FOR KNIT FABRICS
MODEL RED.V.85.2400.
8 ZONES
CONSISTING OF:
- ENTRY DEVICE, UNLOADING FROM A TRUCK.
- 2300 MM VACUUM SLOT FOR LINT EXTRACTION CONNECTED TO A CENTRAL SYSTEM
THEREFORE SLOT IS ONLY AVAILABLE
- CORINO MADE CENTERING DEVICE.
- OPERATING PLATFORM:
- ALLAN BRADLEY OVERHEAD PANEL VIEW 900.
- TANDEMATIC
- ERHARD AND LEIMER GUIDES MODEL FR 5501
- VERTICAL RETURN PIN CHAIN.
- PINNING BRUSHES.
- STEAM BOX
- 8 CHAMBERS DIRECT GAS HEATED, EACH CHAMBER 2000 mm LENGTH
- COOLING ZONE WITH FAN MOTOR
- SELVAGE TRIMMING AT EXIT.
(CLICK HERE FOR PICTURES)
QUANTITY: 1
INVENTORY NUMBER: E-6483
KRANTZ TENTER:
YEAR: 1990
ROLLER WIDTH: 3000 mm
WORKING WIDTH: 2800 mm
PIN CHAIN (VERTICAL TYPE)
THERMO OIL HEATING
5 CHAMBERS
CONSISTS OF:
CLOTH ROLLER,
2 BOWL PADDING MANGLE,
PLAITER,
CONTROL PANEL
INCLUDES 2 CAUSTIC SODA TANK
(CLICK HERE FOR PICTURES)
QUANTITY: 1
- SOLD - INVENTORY NUMBER: E-6421
KRANTZ STENTER MODEL K10:
YEAR 1992
W/W 2400mm
6 CHAMBERS
WITH 12 METHANE GAS HEATING-DEVICE
TEMPERATURE 220 DEGREES CENTIGRADE
PINS & CLIPS CHAIN (COMBINATION)
ENTRY AND EXIT BIG ROLLER WINDER & FOLDER
COOLING AREA AT THE EXIT
WITH PADDER AND WEFT STRAIGHTENER
(CLICK HERE FOR PICTURES)
QUANTITY: 1
INVENTORY NUMBER: E-6305
MONFORTS TENTER FRAME 2000 mm WITH ZIMMER COATING HEAD:
WIDTH OF ROLLS 2200 mm
J-BOX ACCUMULATOR AT ENTRY
6 CHAMBERS
GAS HEATED
(POSSIBILITY OF HEATING UP TO 210°C IN EACH FIELD)
COOLING FIELD
A COOLING CYLINDER AT EXIT
CALENDER SUITABLE MAINLY FOR COATING APPLICATIONS,
ALL AND SPECIAL PRELIMINARY TREATMENT TYPES,
FOR COLOR AND FUNCTIONAL RUBBING,
FOR FIXATION OF POLYESTER AND ELASTHANE,
POSSIBLE UNICOLOR PRINTING
(PRINTING SCREENS ARE NOT AVAILABLE),
ROLL COMPENSATOR AT EXIT,
OUTPUT TO ROLLS AND TO FLAT FOLD
(CLICK HERE FOR PICTURES)
QUANTITY: 1
INVENTORY NUMBER: E-6291
MONFORTS MONTEX 5000-12F-TWIN AIR STENTER
WORKING WIDTH 2200 mm
YEAR: 1999
COMPRISING:
MONFORTS DE-BATCHING FRAME WITH J-SCRAY
KUSTERS PADDER TYPE 222.52-2000
EVAC SUCTION SLOT
MAHLO WEFT STRAIGHTENER, TYPE RFMC-94H
MONFORT HORIZONTAL CLIP CHAIN
12 BAY GAS FIRED DRYER, COOLING SECTION
MONFORTS ACCUMULATOR FRAME AND BATCHING FRAME
2 CONTROL DESKS
(CLICK HERE FOR PICTURES)
QUANTITY: 1
INVENTORY NUMBER: E-6208
BRUCKNER STENTER:
YEAR: 1978
2200 mm
VERTICAL PIN CHAIN
2 CHAMBER DRYER/HEAT SETTING
HOT OIL HEATED
WITH HOT OIL CIRCULATING BOILER
COOLING SECTION AT EXIT
FLAT FOLDER AT EXIT
3 FINGER UNCURLERS AT EXIT
OVERFEED SYSTEM AT EXIT
(CLICK HERE FOR PICTURES)
QUANTITY: 1
INVENTORY NUMBER: E-6144
MONFORTS MONTEX PIN TENTER FRAME:
INVERTER DRIVE
YEAR 1996
80" WIDE
4-ZONE
GAS HEATED
HORIZONTAL RAILS
ENTRY 12' LONG
HOUSE 43' LONG
12' EXIT
APPROXIMATELY 70' LONG OVERALL
CORINO OPENER
TANDEMATIC GUIDERS
OVERFEED
RAIL GUIDING BY E & L KR 4830
COOLING ON EXIT
FOLDER ON EXIT
EXCELLENT CONDITION
460 VOLT
(CLICK HERE FOR PICTURES)
QUANTITY: 1
INVENTORY NUMBER: E-6141
BRUCKNER COMBINATION PIN/CLIP TENTER:
128 WIDE (3200 mm)
HORIZONTAL CLIP CHAIN (THIS IS WHAT IS MOUNTED NOW)
(PINS ARE NOT THERE)
OVER FEED, 3-FINGER UNCURLER
HOT OIL HEATED
7-ZONES (3 METERS EACH)
KUSTER PAD (FOULARD); 2-ROLL, RUBBER/RUBBER;
25 HP MOTOR; PAD TYPE 223.16.3200
MENZEL BOW ROLL STATION
MENZEL OPENING SECTION
DYE BEAM LET OFF WITH SEW EURODRIVE GEAR MOTOR
BARTON D.C. DRIVE
20 HP MAIN DRIVE MOTOR WITH BALDOR D.C. MOTOR
HUMIDITY CONTROL WITH 4 SENSORS
AT EXIT IT HAS 4 DIFFERENT TYPES OF BATCHERS:
A) FLAT FOLD
B) SIMPLE 2-ROLL SURFACE WINDER
C) DYE BEAM WINDER
D) A FRAME BATCHER
YEAR 1980
CAN BE SEEN RUNNING
HOT OIL BOILER BY PEABODY-GORDON-PLATT
IS AVAILABLE SEPARATELY AT A SEPARATE PRICE.
(CLICK HERE FOR PICTURES)
QUANTITY: 1
INVENTORY NUMBER: E-6130
MONFORTS STENTER FRAME FOR KNITTED FABRIC:
6 CHAMBERS
MODEL 12 G/K-V
YEAR: 1989
ROLLER WIDTH 260 CM
WORKING WIDTH 240 CM
CONSISTING OF:
MONTEX - 2/H 2-ROLL PADDER
ROLLER WIDTH 260 CM
WORKING WIDTH 240 CM
YEAR: 1989
MAHLO CONTROL
TYPE ORTHOMAT, FMC-96 H
YEAR: 1989
FEEDING SECTION
ENTRANCE TENSIONING SECTION 5 M
VERTICAL PIN CHAIN WITH DE-NEEDLING STOP
6 DRYING CHAMBERS
GAS-HEATED
PLEVA HUMIDITY CONTROL
(CLICK HERE FOR PICTURES)
QUANTITY: 1
INVENTORY NUMBER: E-5838
BRUCKNER CONVEYOR BAND TENTER FRAME:
YEAR 1987
VBN 22/6 |