REFERENCE NUMBER: G-1690
FLEXOGRAPHIC REEL TO REEL PRINTING LINE FOR SALE:
4 COLORS
MODEL: NRP–4C
B) MAIN FEATURES
EQUIPPED GEAR BOX ON EACH PRINTING STATION, THESE GEAR BOX
CAN 360? ONLINE PRINT REGISTRATION WHILE THE MACHINE IN RUNNING.
3 OVERHEAD BLOW-HEATERS TO ACCELERATE DRYING
PRODUCTION OUTPUT: 80 TO 100 METERS/ MIN (AVERAGE SPEED)
MACHINE SPECIFICATION:
DIAMETER OF UNWINDING CLOTH: 1200mm MAXIMUM
PROCESSING TUBE WIDTH: 350 TO 850mm (MAX)
PRINTING WIDTH: 840mm (MAX)
PRINTING REPEAT LENGTH: 500 TO 1300mm
PRODUCTION OUTPUT: MAXIMUM 80 TO 100 METERS / MINUTE
UN-WINDING SECTION:
FABRIC ROLL LIFTING: HYDRAULIC TYPE, WITH 1 HP AC MOTOR.
AUTOMATIC EDGE POSITION CONTROL (EPC): HYDRAULIC TYPE,
WITH 1 HP AC MOTOR.
TENSION CONTROL: POWDER BRAKE TENSION CONTROL.
AIR SHAFT: 1 PC (BOBBIN INNER DIAMETER IS 3” AS STANDARD)
IN-FEED MOTOR: AC 2HP MOTOR WITH INVERTER CONTROL
PRINTING SECTION:
NUMBER OF COLORS: 4 COLORS
PRINTING METHOD: 4 + 0, 3 + 1, 2 + 2
INDIVIDUAL GEAR BOX FOR PRINTING REGISTRATION ON EACH COLORS:
EACH PRINTING STATION EQUIPPED A GEAR BOX, THESE GEAR BOX CAN
ONLINE PRINT REGISTRATION.
ADJUSTMENT OF PRINTING POSITION (WITHOUT STOP MACHINE WHEN
ADJUSTMENT): HORIZONTAL POSITION: ADJUST BY SCREW.
VERTICAL POSITION: ADJUSTABLE BY GEAR BOX.
PRINTING ROLLER LIFTING HYDRAULIC UNIT: 2 HP AC MOTOR WITH
HYDRAULIC SYSTEM X 1 UNIT
INK ROLLER NON-STOP MOTOR: AC 1/4 HP REDUCER MOTOR X 4
PRINTING ROLLER HOIST: 1/4 HP AC MOTOR X 1, 1 HP AC MOTOR X 1
MAIN DRIVING MOTOR: 5 HP AC MOTOR WITH INVERTER CONTROL.
DRYING SYSTEM:
MAIN BLOWER WITH HEATER: HEATER 800 W X 9 PCS, WITH 3 HP BLOWER
AFTER PRINTING DRYING BLOWER: HEATER 800 W X 9 PCS, WITH 3 HP BLOWER
BEFORE RE-WIND DRYING BLOWER: HEATER 800 W X 9 PCS, WITH 3 HP BLOWER
INFRARED RAY FOR DRYING: 2000 W (ADJUSTABLE) X 1 UNIT
OUT-FEED MOTOR: AC 2HP MOTOR WITH INVERTER CONTROL
RE-WINDING:
WINDING METHOD: SURFACE FRICTION TYPE.
WINDING MOTOR: AC 2 HP MOTOR WITH INVERTER CONTROL.
POWER CONSUMPTION:
RATED POWER CAPACITY: 40 KW
ACTUAL POWER CONSUMPTION: 28 - 35 KW
DIMENSIONS ( L X W X H ): 9800 X 2250 X 2720mm
WEIGHT: 6500 KG
STANDARD PRINTING ROLLER: 4 PCS EQUIPPED ON MACHINE (ROLLER
SIZE TO BE INDICATED BY CUSTOMER)
SPARE PARTS: 1 LOT (FREE OF CHARGE):
1. COPPER BUSHING X 4 PCS
2. SPANNER X 1SET
3. TOOL BOX X 1 SET
4. OIL CYLINDER REPAIR SET X 1 SET
5. DOTTED STRIP X 16 METER
6. TIMING BELT X 1 PC
OPTIONAL EQUIPMENT:
(NOT INCLUDED IN THE UNIT PRICE)
AUTO ROLL CHANGING SYSTEM (UNWINDING AND REWINDING).
(ENCLOSED AUTO TENSION CONTROL AND DIAMETER 3” AIR SHAFT X 2
PCS FOR UNWINDING)
ADDITIONAL DIAMETER 3” AIR SHAFT FOR UNWINDING ROLL
DIAMETER 8”AIR SHAFT FOR UNWINDING ROLL
CORONA TREATER (4 KW)
AIR COMPRESSOR (2 HP)
AUTOMATIC INK CIRCULATION PUMP
MAJOR PORTION SECURELY FIXED ON WOODEN PALLED WITH PROTECTIVE
PLASTIC SHEET WRAPPING. THEN LOADED INTO ONE 40’ OCEAN CONTAINER.
30% DOWN PAYMENT BY T/T AS ORDER CONFIRMATION,
70% BALANCE PAYMENT BY T/T OR IRREVOCABLE L/C AT SIGHT BEFORE SHIPMENT
SHIPMENT WILL BE EFFECTED WITHIN 75 DAYS IN THE RECEIPT OF DOWN PAYMENT
QUANTITY: 1
|