American Plant & Equipment - G-1567 BIKER PANT PAD MOULD

American Plant & Equipment
G-1567 BIKER PANT PAD MOULD

- Home <> Contact Us -

REFERENCE NUMBER: G-1567

BIKER PANT PAD MOULD FOR SALE:

FORM-PROFILE-CUTTING MACHINE SC11 S

TECHNICAL DATA:

WORKING CUTTING WIDTH: 1100mm

WORKING CUTTING LENGTH: 1200mm

VERTICAL ADJUSTMENT OF THE BLADE FROM TABLE: 0/195mm

VERTICAL STROKE OF THE PRESS-CONVEYOR: 0/195mm

MAXIMUM HEIGHT OF THE FOAM TO BE WORKED: 220mm

MAXIMUM DIMENSION OF THE MOULD: 1100 X 1200mm

TABLE SPEED: 5/17 M/MIN

POWER: 6 KW

TENSION: 400 V

APPROXIMATE WEIGHT: 1200 KGS

-MOVING TABLE WITH ADJUSTABLE SPEED BY MEANS OF POTENTIOMETER

-PRESS-CONVEYOR FOR THE MATERIAL IS VERTICALLY ADJUSTABLE BY MEANS OF

MOTOR REDUCER AND DIGITAL DISPLAY HAND-WHEEL (1/10mm),

SPEED ADJUSTMENT VIA POTENTIOMETER

-VERTICALLY ADJUSTMENT OF THE CUTTING UNIT VIA MOTOR REDUCER AND

DIGITAL DISPLAY HAND-WHEEL(1/10mm)

-KW 4 BLADE BRAKE MOTOR (STANDARD) (ON DEMAND : 7.5KW DEPENDS ON

THE TYPE OF WORK)

-NITRIDING AND WITH PTFE TREATMENT OF THE STEEL BLADE GUIDE WITH MANUAL

ADJUSTMENT OF THE WIDIA THRUST BEARINGS FOR THE CORRECT LOCATION OF THE

BLADE RELATING TO THE BLADE GUIDE

-MOTORIZED GRINDING UNIT COMPLETE WITH DUST SUCTION ASPIRATOR

-MANUAL ADJUSTMENT OF THE BLADE TENSION CONTROLLED BY SAFETY MICRO

-ELECTRIC BOARD WITH CONTROL BOARD

-THE WAITING TIME AT THE DISCHARGING SIDE MAY BE SET BY MEANS OF A

TIME RELAY (AUTOMATIC MODE)

-WIRE CLOTH SAFETY GUARDS TO LIMIT THE ACCESS TO DANGEROUS ZONE

-SENSITIVE EDGES ARE MOUNTED AT THE ENDS OF THE TABLE

-SENSITIVE MAT IS PLACED NEAR THE BLADE

-EMERGENCY STOPS AT THE END OF THE RAILS AND ON CONSOL

-RAL 9003 PAINTED (WHITE)

-MACHINE MANUFACTURED UNDER EC RULES

WORKING:

AFTER MOUNTING THE MOULD ONTO THE TABLE, ADJUSTING THE BLADE POSITION

RELATING TO THE MOULD AND THE PRESS-CONVEYOR, THE PRESS-CONVEYOR

SPEED AND TABLE SPEED ARE AVAILABLE TO BE SELECTED

ONCE THE FOAM IS LOADED THE MACHINE IS READY TO START

MANUAL MODE:

BLADE ON, PRESS-CONVEYOR ON, TABLE ON

BY "START TABLE FORWARD", THE TABLE MOVES TO THE BLADE , THE FOAM IS CUT

AND THE TABLE SPEED DECREASES AND THEN STOPS AT THE “STOP TABLE FORWARD”

POSITION THE OPERATOR REMOVES THE MATERIAL BY "START TABLE BACKWARD”,

THE TABLE DRIVES BACK TO THE START POSITION (FIXED SPEED)

AUTOMATIC MODE:

SELECT THE "AUTOMATIC MODE", AND THEN "START CYCLE": THE BLADE RUNS,

PRESS-CONVEYOR AND TABLE PERFORM THE WORKING CYCLE (FORWARD/BACKWARD)

ON OBSERVING THE PRE-SET BREAK TIME

AT THE END OF PROCESS THE BLADE ONLY RUNS

THE MAXIMUM CONTOUR DEPTH DEPENDS ON THE DENSITY AND COMPRESSIVE

STRENGTH OF THE FOAM

FREE SPARE PARTS:

2 BLADES DIMEMSNIONS: 7450mm X 40mm X 0.50mm

2 GRINDING STONES

TOOL DRESSER

1 MOULD AS PER CUSTOMER DRAWING

SET OF KEYS

ELECTRICAL DIAGRAM

INSTRUCTION BOOK

EC DECLARATION

QUANTITY: 1

(PICTURES AND VIDEOS AVAILABLE)