REFERENCE NUMBER: G-1535
FOAM DRILLING MACHINE (FOAM PERFORATING MACHINE) FOR SALE:
MODEL: F 26
TECHNICAL DATA:
LOADING CONVEYOR: 2100 X 2100mm (82" X 82")
UNLOADING CONVEYOR: 2100 X 2100mm (82" X 82")
MAXIMUM DRILLING WIDTH: 2100mm (82")
MAXIMUM DRILLING HEIGHT: 180mm (7")
HOLE DIAMETER: 6 TO 30mm (1/4" TO 1.18")
MAXIMUM CONTEMPORANEOUS HOLES NUMBER: 26
MINIMUM DISTANCE BETWEEN THE CHUCKS: 80mm
POWER: 11 KW
VOLTAGE: AS PER CUSTOMER
WORKING PRESSURE BAR: 6 (90 PSI)
NET WEIGHT: 2293 KGS (5000 LBS)
FLOOR SPACE: 4375 X 3780 H 2204mm
THE MACHINE DRILLS HOLES INTO POLYUERETHANE MATTRESSES AND
PILLOWS WITH A PLANE SURFACE, VERTICALLY RELATING TO THE TABLE.
THE F26 DRILLING MACHINE CONSISTS OF AN STEEL FRAME WHERE 26
CHUCKS ARE PLACED AND TWO CONVEYORS FOR LOADING AND UNLOADING.
IN ORDER TO AVOID THAT THE MATTRESS MOVES DURING WORKING CYCLE,
A MANUALLY ADJUSTING SMALL ROLL DEVICE IS PLACED ON THE MATERIAL
TO BE PERFORATED.
THE MATERIAL IS CORED BY THE CORE DRILL , EJECTED BY AN AIR JET AND
REMOVED BY MEANS OF A CONVEYOR BELT.
THE CHUCKS SUPPORTED THRUST YOKE MOVES LATERALLY (Y AXIS) AND
VERTICALLY (Z AXIS).
IT’S POSSIBLE TO PROGRAM BOTH MOVEMENTS: THE LATERAL MOVEMENT OF
THRUST YOKE (Y AXIS) UP TO 100mm (IN THIS CASE WE OBTAIN TWO OR MORE
SERIES OF HOLES IN THE SAME LINE (Y PITCH) AND CONVEYOR MOVEMENT
(X PITCH) WITH INFINITY VARIABLE INCREMENTS.
THE MINIMUM DISTANCE BETWEEN HOLES IS 10mm.
IT’S ALSO POSSIBLE TO PROGRAM BOTH STRAIGHT DRILLING AND CROSSED DRILLING.
THE MACHINE IS CONTROLLED ON 4 AXIS AND ITS MOVEMENTS ARE CONTROLLED
BY PLC.
THE KEYBOARD IS EQUIPPED WITH A MULTIFUNCTION CONTROL DEVICE WHERE THE
WORKING DATA IS LOADED.
A GRAPHICAL WINDOW WITH AN ALARM FOR THE WRONG INPUTS HELPS OPERATOR TO
CHECK THE HOLES POSITION.
THE MULTI-FUNCTION CONTROL INCLUDES DIAGNOSTICS.
THE MACHINE IS EQUIPPED WITH A BOARD LUBRICATING SYSTEM DEVICE FOR THE DRILLS.
FREE SPARE PARTS:
26 DRILLS DIAMETER 6 TO 14mm (UPON CUSTOMER REQUEST)
ADJUSTING ROLLER DEVICE
SET OF MAINTENANCE KEYS
ELECTRICAL SCHEMA
INSTRUCTION BOOK
CE CERTIFICATE
DELIVERY: 90 DAYS AFTER RECEIPT ORDER
PACKING:
1 PALLET: 1365 X 4020 X H 2380 GROSS WEIGHT KGS 2465
1 CASE: 1365 X 4020 X H 2440 GROSS WEIGHT KGS 2620
PAYMENT: 50% BY ORDER, 50% ON DELIVERY
ASSEMBLY: INCLUDED. TRAVEL AND STAY CHARGES ON CUSTOMER ACCOUNT.
OPTIONAL:
WITH PTFE TREATMENT DRILLS:
DRILL DIAMETER 12mm (MINIMUM QUANTITY 10)
DRILL DIAMETER 14-16mm (MINIMUM QUANTIY 10 PER SIZE)
DRILL DIAMETER 18-20mm (MINIMUM QUANTITY 5 PER SIZE)
DRILL DIAMETER 22mm (MINIMUM QUANTITY 5)
DRILL DIAMETER 24mm
DRILL DIAMETER 26mm
DRILL DIAMETER 28-30mm
DRILLING SIMULATION SOFTWARE WITH SELF-INSTALLING HARDWARE KEY
TO BE CONNECTED ON USB GATE.
PC REQUIREMENTS: PENTHIUM 3-450 MHZ PROCESSOR, 100 MBYTE DISK,
32 MBYTE STORAGE, WINDOWS 98 OR NEWER VERSIONS.
MULTIFUNCTION CONTROL FUNCTIONS:
THE KEYBOARD IS COMPLETE WITH MULTIFUNCTION CONTROL FUNCTIONS:
DISPLAY WITH PAGESL; READ THEM BY “ARROW” KEY.
ON PAGE “WORKING DATA” IT IS DISPLAYED:
- INCREMENT MOVEMENTS OF X, Y AND Z AXIS.
- REMOVAL TIME OF MATTRESS (IN SECONDS)
- DRILLING QUANTITY (PARTIAL AND TOTAL)
- DRILLING SPEED
ON FOLLOWING PAGE WE FIND:
- MATTRESSES COMPUTATION (PARTIAL AND TOTAL)
- MATTRESS DRILLING TIME DURING THE PROCESS
- WORKING HOURS CHUCKS COUNTER
- WORKING HOURS ELECTRIC BOARD COUNTER
TWO DISPLAY PAGES ARE RELATED TO THE MANUAL MOVEMENTS
(THRUST YOKE, CONVEYOR, LUBRICATING PUMP)
FIVE PAGES TO PRE-SET THE GLOBAL DATA:
- MATTRESS DIMENSIONS
- NUMBER OF DRILLS THAT WE ARE GOING TO USE
- DRILLS DIAMETER IN MILLIMETERS
- CHUCK PITCH (DISTANCE BETWEEN THE DRILLS)
- NUMBER OF PERFORATIONS
- WORKING SCHEDULE (WE CAN MAKE UP TO 9 DIFFERENT PERFORATION
TYPES ON EACH MATTRESS)
- RECIPES (WE CAN STORE AND SAVE THE RECIPES UNDER A REFERENCE
NUMBER OR THE NAME OF CUSTOMER)
STEP-BY-STEP MOVEMENTS (TO TEST THE DRILLING)
A FEW PAGES SHOW THE DATA RELATIVE TO THE OUTSTANDING WORKING.
ALARMS AND DISPLAY OF THE CAUSE OF THE ALARM.
QUANTITY: 1
(PICTURE AND DRAWINGS AVAILABLE)
.jpg)
|