REFERENCE NUMBER: G-0621
2-LAYER AIR BUBBLE WRAP FILM PRODUCTION MACHINE FOR SALE:
MODEL: 85S
INCLUDING:
THE FIRST & SECOND EXTRUDER: 1 SET
T-DIE: 2 PCS
FORMING DEVICE: 1 SET
LAMINATING DEVICE: 1 SET
PULLING ROLLER DEVICE: 1 SET
TURRET WINDER: 1 SET
AIR COMPRESSOR: 1 SET
ELECTRIC POWER: V/ HZ/ 3 PHASE (PER CUSTOMER'S REQUEST)
BASIC SPECIFICATIONS:
RESIN: LDPE, LLDPE
PRODUCTION: AIR BUBBLE WRAP FILM
WIDTH OF PRODUCT: 1365mm
THICKNESS OF PRODUCT: 0.015mm - 0.05mm, TOLERANCE ? 5%
IDLE SPEED: 0 TO 50 M/MIN
PRODUCTION SPEED: DEPENDING ON RAW MATERIALS AND WAYS OF PRODUCTION,
THE TWO LAYER BUBBLE FILM OF DIAMETER 10mm X 4mm PRODUCTION SPEED
IS FROM 30 M/MIN TO 40M/MIN
EXTRUSION CAPACITY: 0 KG/HR TO 150KG/HR
EXTRUDER:
A. SCREW
- DIAMETER: 75mm-----1 PCS, 85mm-----1 PC
- MATERIAL: SACM-645, NITRIDED HARDENED WITH ELECTROPLATING &
GRINDING POLISHED
B. BARREL
- MATERIAL: SACM-645, THE INSIDE AND OUTSIDE ARE BOTH NITRIDED
- TEMPERATURE CONTROL: STAINLESS STEEL HEATER
- CAPACITY: 50 KW, 10 ZONES OF CONTROL (5 ZONES X 2 SETS)
- COOLING BARREL: COOLING WATER PASSES THROUGH THE INNER WATER WAY
OF STEEL-RING AND CAUSES COOLING EFFECT
- HOPPER: MADE OF STEEL, ANGLE BOX TYPE, WITH AUTO VACUUM LOADER 2 SETS
- BARREL LID: STEEL PLATE WELDED STRUCTURE
C. SCREEN CHANGER
- TEMPERATURE CONTROL: STAINLESS STEEL HEATER, CAPACITY 9 KW,
2 ZONES OF CONTROL (1 ZONE X 2 SETS)
- FILTER EXCHANGING: BY MANUAL
D. CONTROLS
- TEMPERATURE CONTROL: STAINLESS STEEL HEATER, CAPACITY 4 KW,
2 ZONES OF CONTROL (1 ZONE X 2 SETS)
- TEMPERATURE METER OF RESIN: ONE ZONE DISPLAY OF THE ACTUAL RESIN
TEMPERATURE OF INNER BARREL
E. T-DIE
- LENGTH OF T-DIE: 1650mm
- DIE LIP: 0.8mm
- MATERIAL: PDS3
- THE T-DIE (RESEMBLES A HANGER). AFTER THE INNER WORKING IS ADJUSTED
WITH THE DIE-LIP SURFACE (ELECTROPLATED), PLASTIC FILM FLOWS DOWN
MIRROR SURFACE OF DIE
- HEATING: STAINLESS STEEL HEATER, CAPACITY 30 KW, 10 ZONES OF CONTROL
(5 ZONES X 2 SETS)
F. CARRIAGE
- LEFT & RIGHT TRANSMISSION: BY 2HP BRAKE MOTOR
- UP-DOWN DEVICE: ± 50mm (MANUAL)
- STRUCTURE: BOX TYPE, STRUCTURAL STEEL & STEEL PLATE WELDED STRUCTURE
- TEMPERATURE CONTROL PANEL: CONNECT WITH CARRIAGE
G. DRIVING MOTOR: AC 60 HP WITH INVERTER-----1 SET, AC 40 HP WITH
INVERTER, 1 SET
H. GEAR BOX: 4 SECTION TYPE GEAR REDUCER, LUBRICANT WITH SCREW, CHILLED BY
A CONDENSER, FORCED CIRCULATION TYPE, 1 SET
FORMING DEVICE:
A. FORMING ROLLER: DIAMETER 400mm X 1150mm, DIAMETER 10mm (BUBBLE DIAMETER)
X 4m (DEPTH), INSIDES IS OF WATER COOLED TYPE
B. SILICON ROLLER: DIAMETER 320mm X 1150mm, THE INSIDES IS WATER COOLED TYPE
C. COOLING ROLLER: DIAMETER 240mm X 1150mm, DIAMETER 200mm X 1150mm,
THE INSIDES IS WATER COOLED TYPE
D. DRIVING MOTOR: AC MOTOR 2HP+INVERTER
E. DRIVING PARTS: PLC CONTROL
F. AIR KNIFE: F OR COOLING FORMING ROLLER
G. CONTROL PANEL: AT MACHINE SIDE
H. MACHINE STRUTCURE: STEEL PLATE AND IRON-PIPE LOCKED BY SCREWS
LAMINATING AND PULLING ROLLER DEVICE:
A. SILICON ROLLER: DIAMETER 240mm X 1500mm, THE INSIDES IS WATER COOLED TYPE
B. COOLING ROLLER: DIAMETER 240mm X 1500mm, THE INSIDES IS WATER COOLED TYPE
C. TRIMMING ROUND KNIFE: DIAMETER 85mm AIR CYLINDER TYPE,
SOLO OPERATION-----2 SETS
D. TRIMMING ROLLER: DIAMETER 100mm X 1500mm BOTH SIDES WITH HEAT TREATMENT
E. DISPOSAL OF TRIMMED EDGES: TORN BY CRUSHER AND INTO EXTRUDER ON LINE
F. DRIVING MOTOR: AC MOTOR 2HP+INVERTER
CONTROL PANEL: AT MACHINE SIDE
MACHINE STRUTCURE: STEEL PLATE AND IRON-PIPE LOCKED BY SCREWS
TURRET WINDER:
A. TYPE: 2 SHAFT EXCHANGING TYPE, CENTRAL WINDING TYPE
B. WINDING SIZE: 1365mm X DIAMETER 1200mm
C. DRIVE OF ROLL-CHANGING: BY 0.5 HP GEAR MOTOR TO DRIVE ROTATION
D. WINDING SHAFT: DIAMETER 75mm AIR SHAFT, 2 PCS
E. MOTOR OF WINDER: 2HP DC MOTOR, 2 PCS
F. ROLL CHANGING: AUTOMATICALLY
G. SLITTING ROUND KNIFE: DIAMETER 85mm AIR CYLINDER TYPE,
SOLO OPERATION, 2 SETS
H. SLITTING ROLLER: DIAMETER 100mm X 1365mm PROCESSED WITH HEAT TREATMENT
I. STATIC ELIMINATING DEVICE: ANTI-STATIC BRUSH, 2 PCS
J. CONTROL PANEL: CONNECTED WITH WINDER STRUCTURE
K. STRUCTURE: STEEL PLATE AND IRON-PIPE LOCKED BY SCREWS
SPARE PARTS:
1 TEMPERAUTRE CONTROLLER
2 MAGNETIC SWITCHS
2 HEATERS FOR T-DIE
2 ROUND KNIVES
1 ROLL FILTER NET
2 HEATERS FOR BARREL
2 AMP. METERS
2 AIR-PRESSURE METER
100 SCREENS (FOR DIAMETER 10mm)
1 TOOL BOX
1 BOTTLE OF SILICONE OIL
2 SELECTIVE SWITCHES
REVERSE JOINT 1.25" LEFT & RIGHT FOR EACH
REVERSE JOINT 1" LEFT & RIGHT FOR EACH
DIRECTION LIGHT - RED & GREEN FOR EACH
PRESS BUTTON SWITCH FOR MOTOR RED & GREEN FOR EACH
REMARKS
THE FOLLOWING ELECTRICAL, WATER PIPING AND AIR PIPING AND RELATIVE
EQUIPMENTS ARE TAKEN CARE OF BY BUYER EXCEPT WITHIN THE MACHINE ITSELF
EQUIPMENT:
EXHAUST DEVICES SUSCH AS THOSE FOR COATING DEVICE, T-DIE,ETC
COOLING WATER EXCHANING EQUIPMENTS, SUCH AS PUMP, COOLING TOWER,
CHILLER, COOLING TANK, ETC
ENGINEERING:
ELECTRICAL CONNECTIONS FROM OUTSIDE ELECTRICITY (POWER COMPANY) TO THE
MAIN MACHINE CONTROL PANEL AND FROM THE CONTROL PANEL TO THE
WIRING POINTS ON THE MACHINE
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
|