INVENTORY NUMBER: E-3542
MONFORTS TOPTEX SHRINKING UNIT (COMPACTOR):
FOR KNITTED AND WOVEN FABRICS
UP TO A MAXIMUM WORKING WIDTH OF APPROX. 67”.
YEAR 1989
DESCRIPTION:
- ONE (1) DOGAL ROLL TYPE ENTRY GUIDING SYSTEM COMPLETE WITH MANUALLY
ADJUSTABLE SCROLL ROLLS AND TENSION BAR FOR WORKING FORM BUGGIES.
- STEAMING ROLLER, STAINLESS STEEL HAVING A DIA. OF 640 MM,
COVERED WITH STAINLESS STEEL NET AND SPECIAL “NOMEX” SYNTHETIC FABRIC.
HEAT RESISTANT UP TO 240O C COMPLETE WITH ALL NECESSARY
STEAM TRAPS, VALVES ETC.
- EXPANDER ROLLS, AC DRIVEN TO OPEN FABRIC ON RUBBER BELT
PRIOR TO SHRINKAGE PROCESS
- RUBBER BELT SHRINKING UNIT (COMPACTOR) CONSISTING OF:
A) STAINLESS STEEL, APPROX. 610 MM DIA. MAIN ROLL.
B) ALMOST NEW RUBBER BELT OF SPECIAL CONSTRUCTION.
C) PRECISION PRESSURE DEVICE FOR PRESSING THE RUBBER BELT AGAINST
THE MAIN ROLL WITH ADJUSTING DEVICE.
D) RUBBER BELT TENSIONING DEVICE WITH SAFETY SWITCHES.
E) RUBBER BELT SPRAY COOLING SYSTEM WITH COLLECTION TROUGH.
THE BELT RUNS THROUGH A BOTTOM MOUNTED BASIN FOR UNIFORM CHILLING.
F) PNEUMATIC SQUEEZING DEVICE FOR UNIFORM AND CONTINUOS SQUEEZING OF
THE BELT TO REMOVE EXCESS WATER.
- RUBBER BELT GRINDING UNIT WITH 15 HP MOTOR AND SAFETY GUARD.
- DRYING CYLINDER APPROX. 640 MM DIA.
- INSPECTION AND BATCHING MACHINE CONSISTING OF:
A) STAINLESS STEEL SCRAY FOR ACCUMULATING FABRIC DURING THE ROLL CHANGE.
B) PHOTOCELLS LOOP CONTROL
C) INSPECTION TABLE WITH BUILT-IN YARDAGE COUNTER.
D) BATCHING UNIT FOR SMALL ROLLS (MAX. 600 MM) WITH SELVEDGE ALIGNMENT
BY PHOTOCELL.
E) MOTOR DRIVEN RUBBER COVERED WINDING ROLLERS.
DRIVE SYSTEM AND CONTROLS:
- ALL COMPONENTS OF THE MACHINE ARE DRIVEN BY DC.
- SEPARATE OPERATOR CONTROL CONSOLE TO ADJUST ALL PARAMETERS
FOLLOWING ITEMS ARE INCLUDED:
- ELECTRIC WIRING HARNESS FOR CONNECTIONS BETWEEN SWITCH CABINET,
CONTROL BOARD AND MOTORS.
- TEMPERATURE REGULATION DEVICE FOR THE SHRINKING UNIT COMPLETE WITH
PNEUMATIC VALVE.
- TEMPERATURE REGULATION DEVICE FOR THE FELT CALENDER COMPLETE WITH
PNEUMATIC VALVE.
- THERMIC SYSTEM ON BOARD THE MACHINE INCLUDING ALL NECESSARY REDUCTION
VALVES, ROTATING JOINTS, CONDENSATE TRAPS, HOSES AND VACUUM BREAKERS.
VOLTAGE 480V/3/60HZ
QUANTITY: 1
|