INVENTORY NUMBER: E-6946
PERKINS 3-ROLL CALENDER:
STEEL-PAPER-STEEL CONFIGURATION
(1) PAPER ROLL = 70" X 20" DIAMETER
(2) STEEL ROLL = 70" X 18" DIAMETER
EMERSON D.C. MOTOR
HP: 30
RPM: 1750
VOLT: 240
HYDRAULIC PRESSURE 70 TONS
GAS HEATED
(CLICK HERE FOR PICTURES)
QUATNTITY: 1
INVENTORY NUMBER: E-5505
RAMISCH KLEINEWEFERS 2-ROLL CALENDER:
ORIGINAL YEAR 1983; FULLY REBUILT IN YEAR 2000
3400 MM (FINISHED WEB WIDTH)
ROLLER SURFACE WIDTH OF CALENDER ROLLER: 3650 MM
MAX. MATERIAL WIDTH: APPROX. 3400 MM
MAX. EFFECTIVE ROLLER NIP PRESSURE: 200,000 N
DIAMETER OF UPPER CALENDER ROLLER: 500 MM
DIAMETER OF LOWER CALENDER ROLLER: 500 MM
DIAMETER OF COOLING ROLLERS – 2 ITEMS: 480 MM
DIAMETER OF COOLING ROLLERS – 1 ITEM: 240 MM
DIAMETER OF GUIDE ROLLER – 2 ITEMS: 200 MM
DRIVE SIDE, SEEN IN DIRECTION OF MATERIAL FLOW: RIGHT
MACHINE PAINT COLOR: RAL 6011
MACHINE MOTORS PAINT COLOR: RAL 6005
OPERATING VOLTAGE: 3 X 460 VOLTS, 60 HZ
CONTROL VOLTAGE: 110 VOLTS, 60 HZ
MAGNETIC VALVE VOLTAGE: 110 VOLTS, 60 HZ
VOLTAGE FLUCTUATIONS: SMALLER +/- 5%
FREQUENCY FLUCTUATIONS: SMALLER +/- 1%
DIRECT SWITCHING ON OF MOTORS POSSIBLE UP TO A CAPACITY OF: 10.0 KW
TYPE OF PROTECTION FOR THE MOTORS: IP 44
WORKING SPEED: 9 – 180 M/MIN
ACCELERATION/DELAY TIME: APPROX. 6 M/SEC
BRAKING TIME GIVEN EMERGENCY OFF: APPROX. 12 M/SEC
TWO OVERHEAD 5-TON HOISTS TO REMOVE ROLLS
ONE OVERHEAD REMOVABLE HOOD (ON ROLLERS)
ONE PARKINSON AUTOMATIC WINDER AND BATCHER WITH AUTOMATIC CUT-OFF
SPEED 20 METERS PER MINUTE
LOCATION: USA
(CLICK HERE FOR PICTURES)
QUANTITY: 1
INVENTORY NUMBER: E-4592
RAMISCH 3200 MM WORKING WIDTH CALENDER:
4 ROLLS; DESCRIPTION WHICH IS AS FOLLOWS:
THE FIRST ROLL IS 600mm DIAMETER X 3200mm WIDE
SYNTHETIC SURFACE.
THE SECOND ROLL IS 267mm DIAMETER X 3200mm WIDE
ENGRAVED SURFACE
HOT OIL HEATED, HEIZA-MAT HOT OIL BOILER.
THE THIRD ROLL IS 277mm DIAMETER X 3420mm WIDE
CHROMED, SMOOTH SURFACE
HOT OIL HEATED, HEIZA-MAT HOT OIL BOILER.
THE FOURTH ROLL IS 594mm DIAMETER X 3210mm WIDE
COTTON SURFACE.
THIS CALENDER HAS 2 OIL HEATED BOILERS.
EACH BOILER IS 60KW.
EACH BOILER HAS 8 RESISTANCES.
EACH RESISTANCE IS 7.5KW.
ONE BOILER FOR EACH STEEL ROLL.
THE RECIRCULATION PUMPS ARE 5.5 KW EACH.
RESISTANCE BRAND IS DUNLOW GLASGOW SCOTLAND 440 VOLT.
PRESSURE 80 KGS PER LINEAR CENTIMETER.
MAIN MOTOR IS RELIANCE 20 HP DIRECT CURRENT MOTOR.
(CLICK HERE FOR PICTURES)
QUANTITY: 1
INVENTORY NUMBER: E-4385
B. F. PERKINS 3-ROLL CALENDER:
130" WORKING WIDTH
GAS HEATED
F/S/F ROLLS
130 TONS PRESSURE
OWNER SPENT OVER $50K ON THIS MACHINE THIS YEAR IN UPGRADES.
(CLICK HERE FOR PICTURE)
QUANTITY: 1
INVENTORY NUMBER: E-4010
KLEINEWEFERS CALENDER:
YEAR 1984
COMPLETELY RECONDITIONED IN YEAR 2001
2300 MM WORKING WIDTH
2540 MM ROLLERS WIDTH
ENTRY FRAME WITH ADJUSTABLE TENSION BARS
FOUR CALENDERING ROLLERS (TWO OIL HEATED):
- 2 CHROME PLATED STEEL
- 1 SPECIAL PLASTIC COVERING
1 COTTON PAPER COVERING
AUTOMATIC TEMPERATURE CONTROL ON HEATED ROLLERS
MAX. OPERATION PRESSURE OF 60 TONS
FABRIC DELIVERY IN BIG DIAMETER ROLLS
THE MACHINE IS SUPPLIED COMPLETE WITH 1 WOOL PAPER SPARE ROLLER
COMPLETE ELECTRICAL INSTALLATION V. 380 / 50
THE MACHINE IS STILL RUNNING
(CLICK HERE FOR PICTURES)
QUANTITY: 1
INVENTORY NUMBER: E-3988
GUARNIERI CALENDER:
YEAR 1999
MANAGED BY COMPUTER
WORKING PRESSURE 60 TONS
ROLLERS WIDTH 2000
EQUIPPED WITH 3 CYLINDERS:
THE 2 EXTERNAL CYLINDERS IN PLASTIC, DIAMETER 600 MM;
THE INTERNAL CYLINDER IS IN STEEL, DIAM. 300, HEATED BY DIATHERMIC OIL.
THE MACHINE IS COMPLETE WITH BOILER FOR THE HEATING OF THE DIATHERMIC OIL.
THE BOILER IS ELECTRICHEAT
THE MACHINE HAS BEEN NEVER USED.
IT RAN ONLY FOR THE STARTING UP.
ALTHOUGH THE MACHINE IS 7 YEARS OLD IT WAS NEVER RUN.
IT CAN BE INSPECTED.
APPROXIMATE PRICE FOR A NEW MACHINE WITH BOILER IS EURO 300,000.00
(CLICK HERE FOR PICTURES)
QUANTITY: 1
INVENTORY NUMBER: E-3854
BUTTERWORTH 3-ROLL CALENDER:
134" WIDE ROLLS (130" FILL)
GAS HEATED TOP ROLL
ENTRY FROM ROLLS OR
FROM KRANTZ DRIVEN A-FRAME UNWIND (CENTER DRIVEN)
KRANTZ 132" COMPENSATOR
CALENDER HAS NATURAL GAS HEATED UPPER ROLL
FILLED CENTER ROLL
STEEL BOTTOM ROLL
TWO ROLL WIND-UP
KRANTZ A-FRAME WINDER
CENTER/ SURFACE DRIVEN, MODEL 604-305
TWO OVERHEAD HOISTS 1/2 TON AND RAIL
(CLICK HERE FOR PICTURES)
QUANTITY: 1
INVENTORY NUMBER: E-3830
STORK THERMO-BONDING CALENDER:
MODEL LCF 151/4000
YEAR 1987
WORKING WIDTH: 4000 MM
MAX. TEMPERATURE 240 CELSIUS DEGREES
NO. 1 OIL HEATED
COMPLETE WITH:
1 HOT CYLINDER DIAMETER 1350 MM, HARD CHROMIUM PLATED
1 LINEAR PRESSING ROLLER
2 COOLING ROLLERS
1 CALIBRATING ROLLER
ELECTRIC MOTORS
NO ELECTRIC CONTROL PANEL
(CLICK HERE FOR PICTURES)
QUANTITY: 1
INVENTORY NUMBER: E-3091
RAMISCH CALENDERS:
(CLICK HERE FOR PICTURES)
E-3091-A RAMISCH CALENDER
TYP: RK 360
N.R.: 62220
83” WORKING WIDTH
3 ROLLS
QUANTITY: 1
SOLD E-3091-B RAMISCH CALENDER
TYPE: 380H
N.R.: 68246
70” WORKING WIDTH
NO MOTOR
3 ROLLS
QUANTITY: 1
E-3091-C RAMISCH KLEINWEFER CALENDER
YEAR 1984
N.R.: 11140400
85” WORKING WIDTH
3 ROLLS
QUANTITY: 1
- SOLD - INVENTORY NUMBER: E-3109
VERDUIN 130" CALENDER:
(ESTIMATED 1970S)
WITH CRADLE BOX UNWIND STAND
J-BOX ACCUMULATOR
AND TENSIONING ROLL STAND
WITH WEB GUIDE
CALENDER COMES WITH TWO HUSK ROLLS AND ONE NYLON ROLL AND MANDREL
(CLICK HERE FOR PICTURES)
QUANTITY: 1
INVENTORY NUMBER: E-3134
PERKINS 120" CALENDER:
3-ROLL
100 TON
YEAR 1968
150 HP
550 VOLT, 3/60,
STEEL / FILLED / STEEL
STEEL ROLLS 20" DIA.
FILLED 24"
RAMS 8" DIA.
PERKINS HYDRAULIC UNIT
3-BAR TENSION
3-ROLL EXPANDER GROUP
GUIDE ROLL
BEARING LUBE SYSTEM, STEAM
(CLICK HERE FOR PICTURES)
QUANTITY: 1
- SOLD - INVENTORY NUMBER: E-3111
BUTTERWORTH CALENDER:
132" 3-ROLL CALENDER
TOP ROLL - SCHREINER - GAS HEATED
MIDDLE ROLL - FILLED
BOTTOM ROLL - STEEL
130 TONS HYDRAULIC PRESSURE
LET OFF
BATCHER WITH SAW BLADE CUT OFF
AC INVERTER DRIVE
SPARE ROLL
(CLICK HERE FOR PICTURES)
QUANTITY: 1
INVENTORY NUMBER: E-3108
MORRISON HORIZONTAL CALENDER:
138"
3 ROLL
STEEL
FILLED
STEEL
PNEUMATIC PRESSURE
(2) STAINLESS STEEL ROLLS ARE 20" DIA.
MIDDLE ROLL IS 10" DIA.
60 HP DC MOTOR
50 TON
USED CONDITION
(CLICK HERE FOR PICTURES)
QUANTITY: 1
|