REFERENCE NUMBER: E-9962
MODEL SKB DOUBLE SERGING MACHINE FOR SALE (NEW MACHINE):
USED TO DOUBLE SERGE MATTRESS SIDE PANEL,
IT HAS TWO INDEPENDENT SERGERS, SYNCHRONIZATION BETWEEN
THEM IS CONTROLLED BY TWO AC MOTORS WITH FREQUENCY INVERTERS,
THE MACHINE HAS TWO PULLERS WITH SERVO DRIVE VARIABLE SPEED
WITH LONG LASTING URETHANE ROLLERS, MATERIAL TENSIONING DEVICE,
MATERIAL REWINDER.
MACHINE HAS AUTO-CUTTING FOR EXCESSIVE MATERIAL ALONG WITH
A VACUUM COLLECTION DEVICE FOR SCRAPS.
WITH THREAD BREAK DETECTION DEVICE,
MATERIAL SPLICE AUTO-STOP DEVICE.
TECHNICAL DATA:
SERGING MODE: AVAILABLE IN SINGLE SIDE BORDER OR DUAL BORDER
SEWING WIDTH: 5 TO 7mm (0.70" TO 0.275")
SERGING WIDTH: 150 TO 500mm (ADJUSTABLE) (6" TO 20")
MAXIMUM MATERIAL THICKNESS: 20mm (MIDDLE DENSITY) (0.078")
NEEDLE PITCH: 0 TO 6mm, FREELY ADJUSTABLE (0 TO 0.25")
MAXIMUM PRESSER LIFT: 15mm (0.60")
QUANTITY: 1
(CLICK HERE FOR PICTURES)
REFERENCE NUMBER: E-9959
KINGTEX MATTRESS FLANGING MACHINE FOR SALE (NEW MACHINE):
MODEL B-II
MATTRESS QUILT AND FLANGE FABRIC MAY BE SEWN UP TOGETHER
AND OVERLOCKED SIMULTANEOUSLY.
FEATURES DOUBLE AIR CYLINDER, FIVE THREADS, ADJUSTABLE
PRESSER FOOT PRESSURE, AND STEPLESS SPEED REGULATION.
IT IS SUITABLE FOR SEWING A VARIETY OF FABRIC OF DIFFERENT
TEXTURES.
TECHNICAL DATA:
MAXIMUM SEWING THICKNESS: 50mm (2")
SEWING WIDTH: 20mm TO 25mm (0.78" TO 1")
PRESSER FOOT LIFT HEIGHT: 15mm (0.60")
STITCH: 0 TO 6mm (ADJUSTABLE)
MAXIMUM SEWING SPEED: 5000 RPM
SEWING HEAD TYPE: KINGTEX
UPPER FEED BELT AVAILABLE: YES
NEEDLE BAR TYPE: DOUBLE BAR
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-9319
LONGARM LABEL SEWER AND QUILT REPAIR COMBINATION WORKSTATION FOR SALE:
4 SUPERCOMBO 4
NEW - 4 FOOTLIFT
FOR EASY LOADING AND UNLOADING OF PANELS.
THIS MULTI PURPOSE MACHINE IS SPECIFICALLY BUILT FOR THE MODERN
MATTRESS MANUFACTURER FOR THE ATTACHMENT LABELS IN THE CENTER OF THE
MATTRESS AND CORNER STREAMERS TO THE THICKEST MATTRESS PANELS.
AT THE SAME TIME INCREASING PRODUCTION RATES AND RELIEVING OPERATOR
FATIGUE.
AT THE PUSH OF A BUTTON THE MACHINE INSTANTLY CONVERTS FROM ZIG ZAG
LABEL SEWING MODE TO DEDICATED QUILT REPAIR CAPABILITY.
NO NEED FOR SEPARATE WORKSTATIONS.
QUILT REPAIR SELECTION:
BY SIMPLY PUSHING A BUTTON, THE MACHINE AUTOMATICALLY CONVERTS FROM
LABEL SEWING CAPABILITY TO QUILT-REPAIR MODE.
THE POWER FEED IS DISABLED.
STRAIGHT SEWING IS ENGAGED.
THE DARNING FOOT IS ENGAGED WHICH ALLOWS FOR EASY MULTI DIRECTIONAL
MOVEMENT WHEN REPAIRING THE MOST COMPLICATED PATTERNS ON THE MOST
DIFFICULT PANELS.
FOR LABEL SEWING CAPABILITY PUSH THE BUTTON AGAIN.
FEATURES:
47 1/4" (1200mm) UNDERARM CLEARANCE.
HALF OF A KING-SIZE PANEL.
AUTOMATIC FOOT AND FEEDLIFT: 4 LIFT.
PRESSER FOOT LIFT OF 1AND FEED-LIFT CLEARANCE OF 2.
THESE FUNCTIONS ARE CONTROLLED BY THE OPERATOR FOOT PEDAL IN THE
HEEL BACK POSITION.
USING THE SECOND FOOT PEDAL THE MACHINE NOW GIVES AN INCREDIBLE
4 FOOTLIFT, MAKING UNLOADING AND LOADING OF THE THICKEST PANELS
VERY EASY.
AUTOMATIC THREAD TRIMMING.
AUTOMATIC BACK-TACK.
POWER FEED SYSTEM.
AUTOMATIC LUBRICATION SYSTEM.
DEDICATED QUILT-REPAIR CAPABILITY.
THE FOOT, FEEDLIFT, BACKTACK AND THREAD TRIMMING COMBINATION ARE
ACTIONED AS SIMULTANEOUS FUNCTIONS BY THE OPERATOR FOOT PEDAL IN
THE HEEL BACK POSITION.
AT THE SAME TIME THE NEEDLE POSITIONS AUTOMATICALLY IN EITHER THE
UPPER OR LOWER POSITION FOR EASY ROTATION AND LOADING OF PANELS
WHEN ATTACHING LABELS.
THE AUTOMATIC THREAD TRIMMING/ BACKTACK COMBINATION ALLOWS FOR QUICK
DIAGONAL POSITIONING OF THE PANEL / LABEL WHEN SEWING, WHILE ACHIEVING
THE BEST RESULTS WITH MINIMUM ROTATION OF PANEL.
TO ENSURE CONSISTENT TAILORING A TOP AND BOTTOM POWER FEED SYSTEM
IS PROVIDED WHICH DELIVERS CONSTANT STITCH LENGTH, ENSURING PERFECT
PRESENTATION OF YOUR LABELS EVERY TIME, EVEN UNDER EVEN THE MOST
DIFFICULT SEWING CONDITIONS.
THE VARIABLE SPEED DIAL ALLOWS THE MACHINE SPEED TO BE ADJUSTED TO
SUIT ALL SEWING CONDITIONS.
AIR PRESSURE REWIND: 60 TO 80psi
STANDARD EFKA SERVO/QUICK ROTAR SERVO; 550 WATT
CAN SEW HIGH DENSITY LATEX WITHOUT ANY PROBLEM
HEAD IS A MODIFIED PFAFF 418
RUNNING SPEED: 2000rpm
SHIPPING CRATE IS 2100 x 700 x 1200mm (84" x 28" x 48")
APPROX. SHIPPING WEIGHT: 750lb
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-7793
DOUBLE BORDER SERGER:
(INLINE - STRAIGHT TYPE)
WORKING WIDTH: 18 INCHES MAXIMUM
2 JUKI OVERLOCK SEWING HEADS 3300 TYPE 7000 RPM
NORMALLY RUNNING AT 4000 RPM (90 LINEAR FEET PER MINUTE)
FEED STAND
WIND UP STAND
BOTH THE FEED AND THE WIND UP ARE ON THE SAME SIDE
TOTAL MOTOR HP: 1.5
(0.5 FOR EACH SEW HEAD AND 0.5 FOR THE WINDER)
PACKED IN WOODEN BOX - SHIPPING DIMENSIONS:
- 4 FT. X 4 FT. X 5 FT. TALL, 350 LBS. WEIGHT
ADJUSTABLE WIDTH:
- FROM MINIMUM 2 INCHES TO MAXIMUM 18 INCHES WIDE
WIDTH IS ADJUSTED WITH HAND CRANK
THE LOWER MACHINE IS ONLY ADJUSTED FOR THE WIDTH
22 INCH WIDTH AVAILABLE AT ADDITIONAL PRICE
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-7645
GALKIN GAP 3300 FLANGER-SERGER:
WITH TABLE AND MOTOR
QUANTITY: 1
(CLICK HERE FOR PICTURES)
- SOLD - INVENTORY NUMBER: E-7531
TATUM 3-SIDED PILLOW SEWING MACHINE:
SEWS UP TO 30 INCH SQUARE
WITH MOST OF THE BUSINESS IN THE 16 OR 18 INCH SIZES.
THE LAST SIDE IS LEFT OPEN AND CLOSED
AFTER THE BLOWING & FILLING OPERATION.
THE POWER SUPPLY IS 220 VOLT 3 PHASE
QUANTITY: 1
INVENTORY NUMBER: E-7063
UNITED DOUBLE BORDER SERGER:
MODEL: OC
WITH UNION SPECIAL HEADS MODEL 39500
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-7049
PORTER 2000 SERGER FLANGER:
WITH TABLE AND MOTOR
NEEDLE POSITIONER
CHECKED OUT AND COMPLETE
GUARANTEED IN RUNNING CONDITION
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-6408
CONSEW LOCK STITCH LONG ARM
MODEL NO.: 146RB1
SYSTEM: 135X17 SZ21
GROZ-BECKERT
QUANTITY: 1
(CLICK HERE FOR PICTURES)
- SOLD - INVENTORY NUMBER: E-6212
PORTER 504 DOUBLE HEAD BORDER SERGER:
MODEL PE504-DO
MACHINES ARE SIDE BY SIDE
LEFT AND RIGHT SEWING HEADS
RAW BORDER IS PULLED DIRECTLY FROM EITHER CART OR ROLL
SERGED BORDERS FEED DIRECTLY TO BORDER CUTTER OR WINDUP UNIT
BORDER WIDTH FROM 3 1/2" TO 20" (89 MM TO 508 MM)
AUTOMATIC THREAD BREAK AND MATERIAL RUN-OUT DETECTION
MATERIAL: UP TO 1/2" (12.7 MM)
SPEED: 6000 RPM AT 4.5 SPI
FOOTPRINT: 54" X 112" (1.3 M X 2.8 M)
YIELD: 40 +/- YARDS PER MINUTE
QUANTITY: 1
INVENTORY NUMBER: E-5287
GALKIN LONG ARM REPAIR MACHINE:
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-5021
UNITED DOUBLE BORDER SERGER:
MODEL OC
WITH TWO UNION SPECIAL 39500 GW SEW HEADS
TWO THREAD STOP MOTION
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-4851
GRIBETZ DOUBLE BORDER SERGER:
MODEL SM5500
V 220 PHASE 3
2 MERROW 550 HEADS
1 SPARE MERROW SEWING HEAD
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-4790
JAMES CASH DOUBLE BORDER SERGER:
YEAR 2000
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-4680
TATUM AUTOMATIC LENGTH SEWING MACHINE:
TO SEW THREE ROLLS OF FABRIC TOGETHER LENGTHWISE,
USUALLY "MUSLIN FABRIC", FOR THE BACK OF BEDSPREADS.
YOU CAN BUY TWO FABRICS EACH 60" AND SEW THEM INTO ONE 120" WIDTH.
ALTERNATIVELY, YOU CAN BUY THREE FABRICS EACH 40", ETC., ETC.
THIS WILL ENABLE THE BUYER TO USE CHEAP NARROW FABRIC AND
END UP WITH 120" GOODS THAT CAN BE USED ON THE BACK OF BEDSPREADS,
MATTRESS COVERS, COMFORTERS, CURTAINS, ETC.
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-4642
UNION SPECIAL LONG ARM:
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-4151
PORTER LONG ARM LABEL SEW MACHINE:
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-3288
PORTER 1000 SERGER FLANGER:
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-3212
PORTER MODEL PLS-107-30P ARM LABEL SEWER
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-3212
PORTER MODEL PTS-515-SS AUTOMATIC GIRDER FLANGER
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-3067
PORTER LONG ARM LABEL MACHINE:
MODEL PLS 107-30-P
SERIAL NUMBER 70250
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-3056
PORTER BLIND STITCH
PBS-700
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-3056-A
PORTER LONG ARM REPAIR MACHINE
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-2913
SINGER 300W SEW HEADS:
REBUILT
|