REFERENC ENUMBER: G-0814
FOAM ROLL COMPRESSION MACHINE FOR SALE:
ROUND-ROLL PRESS MACHINE - PUR-COMPRESS - FOR PRESSING AND
ENVELOPING POLYURETHANE FOAM
THIS VARIANT OF PRESS HAS INSTALLED PRESS-BELT “HABASIT LINK”
TECHNICAL INFORMATION:
PRODUCT: ROUND-ROLL PRESS MACHINE
TYPE: COMPRESS 3
MAX LENGTH: 5830mm (+ PLACE FOR THE LIFT)
MAX WIDTH: 4440mm
MAX HEIGHT: 3760mm
BELT DRIVE: 2.2 KW
BELT-TIE DRIVE: 4 KW
COVER-MATERIAL TOWING DRIVE: 0.37 KW
BELT-ENGAGEMENT DRIVE: 0.25 KW
HYDRAULIC SET MOTOR: 5.5 KW
TOGETHER: 12.4 KW
SPECIFIED POWER: 15 KW
OPERATING AIR PRESSURE: 6 BAR
CYCLE AIR CONSUMPTION: 70 L
OIL PRESSURE: 70 BAR
OIL TYPE: HYDRAULIC OIL “OLMA 46”
PRESSING FORCE: 20,000 N
BELT SPEED: 20 M/MIN
PRESSING TIME (1 CYCLE): 60-80 S
ROUND-ROLL MAX WIDTH: 2200mm
ROUND-ROLL MAX DIAMETER: 2000mm
ROUND-ROLL MIN DIAMETER: 400mm
ROUND-ROLL MAX CHANGE OF DIAMETER: 900mm
(IN THE CASE WHEN ROUND-ROLL DIAMETER IS 2000, BY SMALLER DIAMETERS
OR SOLID MATERIALS THE SIZE IS SMALLER)
WEIGHT: 4000 KG
COVER-MATERIAL ROUND-BALL MAX DIAMETER: 450mm
THE MACHINE SHOULD NOT BE USED IN EXPLOSIVE ATMOSPHERE
EMISSION: AIR-70L/CYCLE
NOISE: <70DB
COMPONENT PARTS:
-MACHINE FRAME
-CLOSING YOKE
-BELT-TIE MECHANISM
-BELT-START MECHANISM
-COVER-MATERIAL DOSE MECHANISM (POLYETHYLENE FOIL)
-COVER-MATERIAL WELDING AND CUTTING MECHANISM (POLYETHYLENE FOIL)
-COVER-MATERIAL UNROLL MECHANISM
-HYDRAULIC AND PNEUMATIC EQUIPMENT
-ELECTRO-BOX WITH CONTROL CONSOLE
POSSIBLE ADDITIONAL PARTS:
-COVER-MATERIAL LIFT; CARRYING CAPACITY: 500 KG (AT SEPARATE PRICE)
-MONORAIL CRANE WITH GRAB FOR LIFTING ROLL OUT OF ROUND-ROLL PRESS
MACHINE (AT SEPARATE PRICE)
-OPERATING PLATE
MACHINE IS EQUIPPED WITH OPERATING CONTROLLER “SIEMENS OP3”
WITH THE CONTROLLER WE ARE ABLE TO CHOOSE FUNCTIONS OR CHANGE PARAMETERS
THE MACHINE CORRESPONDS TO THE SAFETY REGULATIONS AND GENERAL
WARRANTY PERIODS
WARRANTY PERIOD: 12 MONTHS
COLORS OF THE MACHINE:
-BLUE: 5010 (CARCASE)
-GREY: 7040 (PROTECTIVE SHEETS AND FIXED BARRIER)
ON REQUEST OTHER COLORS ARE POSSIBLE AGAINST ADDITIONAL PRICE
AFTER TESTING THE MACHINE SHOULD BE PARTLY DISMANTLED BECAUSE OF THE
TRANSPORT
TIME OF DELIVERY: 5 MONTHS AFTER RECEIPT OF CONFIRMATION REGARDING
PAYMENT OF ADVANCED INVOICE
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-5989
FOAM ROLL COMPACTOR:
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-5988
ROUND BLOCK FOAM MACHINE:
PRODUCES 100 BLOCKS PER HOUR EACH WEIGHING 120 LBS
APPARENT YEAR 1996
50" DIAMETER (1270 MM)
WITH CUT OFF SAW AT THE EXIT
COMPLETE WITH METERING UNITS, FEED TANKS, ETC.
STILL ASSEMBLED IN ORIGINAL SPOT.
CAN BE SEEN RUNNING BY APPOINT MENT.
OVERALL LENGTH: 132 FEET (39.6 METERS)
OVERALL HEIGHT: 14.5 FEET (4.35 METERS)
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-5987
CO2 UNIT FOR CONTINUOUS FOAMING MACHINE:
NEW IN 1992
BRAND: BEAMECH
PRAXAIR REFRIGERATION UNIT FOR CO2 (LEASED BUT MAY BE AVAILABLE)
RUNNING AT 240 PSI AND MINUS 22 DEGREES CENTIGRADE
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-5986
BEAMECH SQUARE FOAM BLOCK MACHINE:
NEW HENNECKE CONTROL PANEL FOR AUTOMATIC MIX FEED
BEAMECH METERING UNITS
PRODUCES 100 BLOCKS PER HOUR OF 120 LBS EACH
OVERALL LENGTH: 132 FEET (39.6 METERS)
OVERALL HEIGHT: 14.5 FEET (4.35 METERS)
WITH AUTOMATIC CUT OFF UNIT AT THE EXIT
APPROXIMATE YEAR: 1992
STILL INSTALLED IN PLACE BUT CAN BE SEEN RUNNING BY APPOINTMENT.
COMPLETE WITH METERING UNITS, FIELD TANKS, ETC.
QUANTITY: 1
(CLICK HERE FOR PICTURES)
- SOLD - INVENTORY NUMBER: E-3772
URETECH ROUND BLOCK FOAM PLANT:
MANUFACTURER: URETECH RBM 2000
YEAR: 1993
COMPLETE WITH:
CONVEYORS
MIXING HEAD
TUNNEL (52" DIAMETER)
VENTILATION FANS
POLY SYSTEM & AUTOMATIC TRAVELLING CUT-OFF SAW
CAN BE SEEN OPERATING.
WILL BE DISMANTLED IN THE NEAR FUTURE
APPROX 2 X 40' CONTAINERS NEEDED TO SHIP
INVENTORY NUMBER: E-3546
MANUAL FOAM I.L.D. (I.F.D.) TESTER (NEW):
FOR ASTM STANDARD # D3574
TABLE TOP MODEL
110 VOLTS - 60 HZ
(ALTERNATIVE 50 HZ AVAILABLE FOR OVERSEAS CUSTOMERS)
SPECIFICATIONS:
THIS IS A SIMPLE FOAM INDENTATION FORCE DEFLECTION (IFD) TESTER
CAPABLE OF TESTING SAMPLES 28” SQUARE AND UP TO 8” THICK.
IT USES A MODIFIED 8” STROKE VARIABLE SPEED DC DRIVE LEAD-SCREW ASSEMBLY
WITH AN ADJUSTABLE SPEED RANGE TO MEET THE REQUIREMENTS OF ASTM D3574.
(THAT SPEC ALLOWS THE TEST TO BE DONE WITHIN A RANGE OF 0.83 TO 3.3 MM/SEC).
A PRECISION LOAD SENSOR AND DIGITAL DISPLAY PROVIDE THE IFD LOAD VALUES.
MAXIMUM LOAD CAPABILITY IS 250LBS.
THE CUSTOM FABRICATED STRUCTURE (WITH THE REQUIRED LOWER VENTING GRID)
IS ANODIZED ALUMINUM.
FOAM CONTACT IS MADE WITH A PROVIDED 8” DIAMETER “INDENTOR FOOT”
ON A PIVOT COUPLING.
A THREE-POSITION SWITCH IS PROVIDED, ALONG WITH A SPEED CONTROLLER,
TO ALLOW THE LOAD TO BE SLOWLY BROUGHT DOWN ONTO THE FOAM.
THE LEAD-SCREW WILL DYNAMICALLY BRAKE WHEN RELEASING THE SWITCH
AT THE CORRECT POSITION,
(WHICH IS CONFIRMED BY READING A DIGITAL POSITION SENSOR).
DECAYS IN THE FOAM LOAD AGAINST THE INDENTATION FORM CAN THEN BE
MONITORED USING A SIMPLE STOPWATCH.
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-3029
EDGE ROUNDING MACHINE FOR FLEXIBLE PU FOAM:
THE EDGE ROUNDING MACHINES ARE DESIGNED TO ROUND OFF
THE EDGES OF A CUSHION TO CONVERT IT INTO A PILLOW.
ALL FOUR SIDES ARE CUT ONE BY ONE.
THE CUTTING IS DONE BY AN ENDLESS BAND KNIFE WHICH IS TOTALLY ENCLOSED
IN THE MACHINE BODY EXCEPT AT THE POINT OF OPERATION.
PILLOWS OF DIFFERENT THICKNESS CAN BE CUT BY CHANGING THE FORMER.
SIZES MAY BE VARIED FROM 75 MM TO 125 MM.
MAIN FEATURES:
HIGH QUALITY FINISHED PRODUCT WITH SMOOTH CUTTING SURFACE.
700 TO 1000 PILLOWS PER EIGHT HOUR SHIFT.
THE BLADE IS PROTECTED.
FORMER SIZE AVAILABLE FROM 75MM TO 125MM.
CHANGEABLE FORMER FOR CUTTING PILLOWS OF DIFFERENT THICKNESS.
SPACE REQUIRED: 2.5 METERS X 1.5 METERS.
POWER REQUIRED: 1.25 HP.
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-2989
AV803 ELECTRICAL THERMAL FOAM SHAPER
CUTTER BAND TOTAL LENGTH 6200/6900MM
DIMENSION 1500 X 1100MM
TOTAL POWER OF MOTOR 3.8 KW
MAX. CUTTING LENGTH 500/650MM C
MAX. CUTTING WIDTH 1200/1500MM
EXTERNAL SIZE (L X W X H) 2500 X 2000 X 1500MM
3000 X 2600 X 1500MM
THIS MACHINE IS MOSTLY SUITABLE FOR CUTTING VARIOUS SHAPES
OF FOAM WHICH CAN BE USED IN COLUMN, CAMBER, AND PILLOW, ETC.
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-2987
AV901 MIXING MACHINE
DIMENSION 1600 X 800 X 1500MM
POWER 1.5 KW
WEIGHT 100 KG
- SUITABLE FOR MIXING AND FILLING MATERIALS SUCH AS
FIBER, FOAM, AND FEATHER, ETC.
- THE FILLING MATERIALS ARE KEPT LOOSE BY A FAST CIRCUMROTATE
DEVICE SO THAT UNIFORM SUCTION EFFECTS ARE GUARANTEED.
- CAN BE MATCHED WITH AV908 OR AV905.
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-2845
URETECH ROUND BLOCK FOAM POURING LINE:
48" DIAMETER
8 YEARS OLD
150 FEET TOTAL LENGTH
RANGE OF WEIGHT: 0.9 TO 1.6 LBS/CUBIC FEET
NO CO2 SYSTEM INCLUDED
INCLUDING ALL OVERHEAD WALKWAYS
ALL CONVEYORS
AUTOMATIC CUT OFF UNIT
QUANTITY: 1
(CLICK HERE FOR PICTURES)
- SOLD - INVENTORY NUMBER: E-2429
MARTIN SWEET CONTINUOUS FOAM MAKING MACHINE:
WIDTH 1.70
LOW PRESURE HEAD
TRANSVERSAL SYSTEM WITH 5 LINES 5500 RPM
TUNNEL IS 15 MTS
WITH TRANSPORTER FOR CURING 20 MTS LONG SPEED UP TO 9MTS 7 MIN
INCLUDES PUMP SYSTEM
5 PUMPS IN TOTAL
2 TANKS FOR POLIOL 2500 KGS/ EACH
1 TANK TDI 2500KGS
5 EXTRACTORS FOR FUMES
CUTTER FOR BLOCKS
MAKE ALBRECHT BAUER TYPE ABLGIA YEAR 1976
WIDTH 2.4 MTS HIGHT MAX 1.20 MTS
ALL EQUIPMENT IS CURRENTLY RUNNING
QUANTITY: 1
INVENTORY NUMBER: E-2339
FOAM MAKING EQUIPMENT:
YEAR 2001
IN REAL NICE CONDITION
CONSISTS OF:
A. PAFF TAPE EDGE MACHINES
(Including additional 2 straight single needle Paff machines all with tables and motors)
QUANTITY: 2
B. VERTICAL CUTTER
QUANTITY: 1
C. CAROUSEL CUTTER
QUANTITY: 1
D. FOAM MAKING MACHINE
QUANTITY: 1
E. FOAM PICKER
QUANTITY: 1 |