REFERENCE NUMBER: G-1567
BIKER PANT PAD MOULD FOR SALE:
FORM-PROFILE-CUTTING MACHINE SC11 S
TECHNICAL DATA:
WORKING CUTTING WIDTH: 1100mm
WORKING CUTTING LENGTH: 1200mm
VERTICAL ADJUSTMENT OF THE BLADE FROM TABLE: 0/195mm
VERTICAL STROKE OF THE PRESS-CONVEYOR: 0/195mm
MAXIMUM HEIGHT OF THE FOAM TO BE WORKED: 220mm
MAXIMUM DIMENSION OF THE MOULD: 1100 X 1200mm
TABLE SPEED: 5/17 M/MIN
POWER: 6 KW
TENSION: 400 V
APPROXIMATE WEIGHT: 1200 KGS
-MOVING TABLE WITH ADJUSTABLE SPEED BY MEANS OF POTENTIOMETER
-PRESS-CONVEYOR FOR THE MATERIAL IS VERTICALLY ADJUSTABLE BY MEANS OF
MOTOR REDUCER AND DIGITAL DISPLAY HAND-WHEEL (1/10mm),
SPEED ADJUSTMENT VIA POTENTIOMETER
-VERTICALLY ADJUSTMENT OF THE CUTTING UNIT VIA MOTOR REDUCER AND
DIGITAL DISPLAY HAND-WHEEL(1/10mm)
-KW 4 BLADE BRAKE MOTOR (STANDARD) (ON DEMAND : 7.5KW DEPENDS ON
THE TYPE OF WORK)
-NITRIDING AND WITH PTFE TREATMENT OF THE STEEL BLADE GUIDE WITH MANUAL
ADJUSTMENT OF THE WIDIA THRUST BEARINGS FOR THE CORRECT LOCATION OF THE
BLADE RELATING TO THE BLADE GUIDE
-MOTORIZED GRINDING UNIT COMPLETE WITH DUST SUCTION ASPIRATOR
-MANUAL ADJUSTMENT OF THE BLADE TENSION CONTROLLED BY SAFETY MICRO
-ELECTRIC BOARD WITH CONTROL BOARD
-THE WAITING TIME AT THE DISCHARGING SIDE MAY BE SET BY MEANS OF A
TIME RELAY (AUTOMATIC MODE)
-WIRE CLOTH SAFETY GUARDS TO LIMIT THE ACCESS TO DANGEROUS ZONE
-SENSITIVE EDGES ARE MOUNTED AT THE ENDS OF THE TABLE
-SENSITIVE MAT IS PLACED NEAR THE BLADE
-EMERGENCY STOPS AT THE END OF THE RAILS AND ON CONSOL
-RAL 9003 PAINTED (WHITE)
-MACHINE MANUFACTURED UNDER EC RULES
WORKING:
AFTER MOUNTING THE MOULD ONTO THE TABLE, ADJUSTING THE BLADE POSITION
RELATING TO THE MOULD AND THE PRESS-CONVEYOR, THE PRESS-CONVEYOR
SPEED AND TABLE SPEED ARE AVAILABLE TO BE SELECTED
ONCE THE FOAM IS LOADED THE MACHINE IS READY TO START
MANUAL MODE:
BLADE ON, PRESS-CONVEYOR ON, TABLE ON
BY "START TABLE FORWARD", THE TABLE MOVES TO THE BLADE , THE FOAM IS CUT
AND THE TABLE SPEED DECREASES AND THEN STOPS AT THE “STOP TABLE FORWARD”
POSITION THE OPERATOR REMOVES THE MATERIAL BY "START TABLE BACKWARD”,
THE TABLE DRIVES BACK TO THE START POSITION (FIXED SPEED)
AUTOMATIC MODE:
SELECT THE "AUTOMATIC MODE", AND THEN "START CYCLE": THE BLADE RUNS,
PRESS-CONVEYOR AND TABLE PERFORM THE WORKING CYCLE (FORWARD/BACKWARD)
ON OBSERVING THE PRE-SET BREAK TIME
AT THE END OF PROCESS THE BLADE ONLY RUNS
THE MAXIMUM CONTOUR DEPTH DEPENDS ON THE DENSITY AND COMPRESSIVE
STRENGTH OF THE FOAM
FREE SPARE PARTS:
2 BLADES DIMEMSNIONS: 7450mm X 40mm X 0.50mm
2 GRINDING STONES
TOOL DRESSER
1 MOULD AS PER CUSTOMER DRAWING
SET OF KEYS
ELECTRICAL DIAGRAM
INSTRUCTION BOOK
EC DECLARATION
QUANTITY: 1
(CLICK HERE FOR PICTURES)
REFERENCE NUMBER: G-1535
FOAM DRILLING MACHINE (FOAM PERFORATING MACHINE) FOR SALE:
MODEL: F 26
TECHNICAL DATA:
LOADING CONVEYOR: 2100 X 2100mm (82" X 82")
UNLOADING CONVEYOR: 2100 X 2100mm (82" X 82")
MAXIMUM DRILLING WIDTH: 2100mm (82")
MAXIMUM DRILLING HEIGHT: 180mm (7")
HOLE DIAMETER: 6 TO 30mm (1/4" TO 1.18")
MAXIMUM CONTEMPORANEOUS HOLES NUMBER: 26
MINIMUM DISTANCE BETWEEN THE CHUCKS: 80mm
POWER: 11 KW
VOLTAGE: AS PER CUSTOMER
WORKING PRESSURE BAR: 6 (90 PSI)
NET WEIGHT: 2293 KGS (5000 LBS)
FLOOR SPACE: 4375 X 3780 H 2204mm
THE MACHINE DRILLS HOLES INTO POLYUERETHANE MATTRESSES AND
PILLOWS WITH A PLANE SURFACE, VERTICALLY RELATING TO THE TABLE.
THE F26 DRILLING MACHINE CONSISTS OF AN STEEL FRAME WHERE 26
CHUCKS ARE PLACED AND TWO CONVEYORS FOR LOADING AND UNLOADING.
IN ORDER TO AVOID THAT THE MATTRESS MOVES DURING WORKING CYCLE,
A MANUALLY ADJUSTING SMALL ROLL DEVICE IS PLACED ON THE MATERIAL
TO BE PERFORATED.
THE MATERIAL IS CORED BY THE CORE DRILL , EJECTED BY AN AIR JET AND
REMOVED BY MEANS OF A CONVEYOR BELT.
THE CHUCKS SUPPORTED THRUST YOKE MOVES LATERALLY (Y AXIS) AND
VERTICALLY (Z AXIS).
IT’S POSSIBLE TO PROGRAM BOTH MOVEMENTS: THE LATERAL MOVEMENT OF
THRUST YOKE (Y AXIS) UP TO 100mm (IN THIS CASE WE OBTAIN TWO OR MORE
SERIES OF HOLES IN THE SAME LINE (Y PITCH) AND CONVEYOR MOVEMENT
(X PITCH) WITH INFINITY VARIABLE INCREMENTS.
THE MINIMUM DISTANCE BETWEEN HOLES IS 10mm.
IT’S ALSO POSSIBLE TO PROGRAM BOTH STRAIGHT DRILLING AND CROSSED DRILLING.
THE MACHINE IS CONTROLLED ON 4 AXIS AND ITS MOVEMENTS ARE CONTROLLED
BY PLC.
THE KEYBOARD IS EQUIPPED WITH A MULTIFUNCTION CONTROL DEVICE WHERE THE
WORKING DATA IS LOADED.
A GRAPHICAL WINDOW WITH AN ALARM FOR THE WRONG INPUTS HELPS OPERATOR TO
CHECK THE HOLES POSITION.
THE MULTI-FUNCTION CONTROL INCLUDES DIAGNOSTICS.
THE MACHINE IS EQUIPPED WITH A BOARD LUBRICATING SYSTEM DEVICE FOR THE DRILLS.
FREE SPARE PARTS:
26 DRILLS DIAMETER 6 TO 14mm (UPON CUSTOMER REQUEST)
ADJUSTING ROLLER DEVICE
SET OF MAINTENANCE KEYS
ELECTRICAL SCHEMA
INSTRUCTION BOOK
CE CERTIFICATE
DELIVERY: 90 DAYS AFTER RECEIPT ORDER
PACKING:
1 PALLET: 1365 X 4020 X H 2380 GROSS WEIGHT KGS 2465
1 CASE: 1365 X 4020 X H 2440 GROSS WEIGHT KGS 2620
PAYMENT: 50% BY ORDER, 50% ON DELIVERY
ASSEMBLY: INCLUDED. TRAVEL AND STAY CHARGES ON CUSTOMER ACCOUNT.
OPTIONAL:
WITH PTFE TREATMENT DRILLS:
DRILL DIAMETER 12mm (MINIMUM QUANTITY 10)
DRILL DIAMETER 14-16mm (MINIMUM QUANTIY 10 PER SIZE)
DRILL DIAMETER 18-20mm (MINIMUM QUANTITY 5 PER SIZE)
DRILL DIAMETER 22mm (MINIMUM QUANTITY 5)
DRILL DIAMETER 24mm
DRILL DIAMETER 26mm
DRILL DIAMETER 28-30mm
DRILLING SIMULATION SOFTWARE WITH SELF-INSTALLING HARDWARE KEY
TO BE CONNECTED ON USB GATE.
PC REQUIREMENTS: PENTHIUM 3-450 MHZ PROCESSOR, 100 MBYTE DISK,
32 MBYTE STORAGE, WINDOWS 98 OR NEWER VERSIONS.
MULTIFUNCTION CONTROL FUNCTIONS:
THE KEYBOARD IS COMPLETE WITH MULTIFUNCTION CONTROL FUNCTIONS:
DISPLAY WITH PAGESL; READ THEM BY “ARROW” KEY.
ON PAGE “WORKING DATA” IT IS DISPLAYED:
- INCREMENT MOVEMENTS OF X, Y AND Z AXIS.
- REMOVAL TIME OF MATTRESS (IN SECONDS)
- DRILLING QUANTITY (PARTIAL AND TOTAL)
- DRILLING SPEED
ON FOLLOWING PAGE WE FIND:
- MATTRESSES COMPUTATION (PARTIAL AND TOTAL)
- MATTRESS DRILLING TIME DURING THE PROCESS
- WORKING HOURS CHUCKS COUNTER
- WORKING HOURS ELECTRIC BOARD COUNTER
TWO DISPLAY PAGES ARE RELATED TO THE MANUAL MOVEMENTS
(THRUST YOKE, CONVEYOR, LUBRICATING PUMP)
FIVE PAGES TO PRE-SET THE GLOBAL DATA:
- MATTRESS DIMENSIONS
- NUMBER OF DRILLS THAT WE ARE GOING TO USE
- DRILLS DIAMETER IN MILLIMETERS
- CHUCK PITCH (DISTANCE BETWEEN THE DRILLS)
- NUMBER OF PERFORATIONS
- WORKING SCHEDULE (WE CAN MAKE UP TO 9 DIFFERENT PERFORATION
TYPES ON EACH MATTRESS)
- RECIPES (WE CAN STORE AND SAVE THE RECIPES UNDER A REFERENCE
NUMBER OR THE NAME OF CUSTOMER)
STEP-BY-STEP MOVEMENTS (TO TEST THE DRILLING)
A FEW PAGES SHOW THE DATA RELATIVE TO THE OUTSTANDING WORKING.
ALARMS AND DISPLAY OF THE CAUSE OF THE ALARM.
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-8929
SPLITTER
MODEL: 1650
64" WIDTH MATERIAL (1650mm)
CYLINDERS RUNNING SPEED: 0 TO 25 RPM
TOTAL POWER: 10.74 KW
CUTTING SPEED: 0 TO 25 METERS PER MINUTE
CUTTING BLADE TOTAL LENGTH: 8800mm (346.4 INCHES)
MACHINE WEIGHT: 2500 KG (5500 LBS)
DIAMETER OF KNURLED ROLLS: 200mm (7.78 INCHES)
MACHINE OVERALL DIMENSIONS: 13.7 FEET WIDE X 4.1 FEET DEEP X 5 FEET TALL
(4200mm X 1250mm X 1550mm)
MAXIMUM HEIGHT OF FOAM: 200mm (7.87 INCHES)
MINIMUM CUT OF FOAM: 2mm (0.787 INCH)
THIS MACHINE CAN BE SUPPLIED AS A SPLITTER WITH KNURLED ROLL I
NSTEAD OF CONVOLUTING ROLLS.
NEW - MADE AGAINST ORDER.
THIS MACHINE CAN BE OFFERED AS A COMBINATION CONVOLUTER-SPLITTER
MACHINE FOR US$12,000.00 MORE.
PRODUCES APPROPRIATE MATERIAL PACKAGING FOR ELECTRONICS,
DELICATE INSTRUMENTS, FOR CAR SEATING AND MATTRESS INDUSTRY,
AS WELL AS EXPENSIVE ARTICLE PACKAGING AND HIGH DENSITY FOAM.
SPITTER INCLUDES IN THE PRICE:
-3 BLADES
-4 GRINDING WHEELS
-1 SET OF MAINTENANCE TOOLS
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-7668
EDGE SWEETS CNC MACHINE:
YEAR: 1997
CUTTING WIDTH 88 INCHES
CUTTING HEIGHT 50 INCHES
CUTTING LENGTH 120 INCHES
SERRATED OSCILLATING BLADE
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-7667
EDGE SWEETS CNC MACHINE:
YEAR: 1995
CUTTING WIDTH 88 INCHES
CUTTING HEIGHT 50 INCHES
CUTTING LENGTH 120 INCHES
SERRATED OSCILLATING BLADE
QUANTITY: 1
(CLICK HERE FOR PICTURES)
- SOLD - INVENTORY NUMBER: E-7473
EDGE SWEETS MODEL HL-4 VERTICAL SAW:
YEAR: 9-17-97
BLADE SIZE: 32’ 11-1/2”
480 VOLTS, 5 AMPS
TABLE DIMENSIONS: 137” WIDE X 14 FEET LONG
THROAT DEPTH: 97 INCHES
THROAT HEIGHT: 64 INCHES
ARMS: 21 FEET LONG
QUANTITY: 1
INVENTORY NUMBER: E-7409
EDGE SAW VERTICAL CUTTER:
MODEL G-3
FLOOR FOOTPRINT: 14 FT. X 17 FT. (4270mm X 5180mm)
TABLE DIMENSIONS: 120" X 144" (3000mm X 3650mm)
THROAT DEPTH: 96" (2400mm)
TALLEST CUT: 52" (1300mm)
SERIAL NUMBER: 1157
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-7408
EDGE SAW VERTICAL CUTTER:
MODEL F-24
SERIAL NUMBER 20008
FLOOR FOOTPRINT 88" X 45" (2235mm X 1144mm)
TABLE DIMENSIONS: 45" X 50" (1144mm X 1270mm)
TALLEST CUT: 18" (457mm)
THROAT DEPTH: 16" (406mm)
QUANTITY: 1
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-7401
EDGE SAW VERTICAL BAND SAW:
TABLE: 94" X 80"
MAXIMUM HIGH BUN TO CUT: 26"
HAS BEEN REBUILT WITH NEW BLADE WHEELS AND NEW TABLE SURFACE |