INVENTORY NUMBER: G-1398
COMPLETE COTTON RING, WEAVING, DYEING AND FINISHING PLANT FOR SALE:
RING SPINNING PLANT
QTY DESCRIPTION
A. OPENING:
1- 1994 Truetzschler BDT-019 Blend-O-Mat, 1720 mm head
1- 1994 Truetzschler AFC
1- 1994 Truetzschler MM6/CVT3
1- 1994 Truetzschler DX Dustex
1- 1994 Truetzschler BOBA-1400 with 5M extended apron, LVSA condensor
2- 1994 Truetzschler CS 1000 with 5M extended apron
2- 1994 Truetzschler SFO 1200
1- 1992 Truetzschler MS-1000 with BS reserve and LVSA condensor
B. CARDING:
8- 1994 Truetzschler DK-760 cards, KH-1000 coilers (40" X 48" cans),
FBK-533 chutes
4- 1997 Marzoli CX-400 cards, coilers with can changers (40" X 48"
cans), B-138 chutes
C. DRAWING:
2- 1996 Vouk SH82/D draw frames, 20" X 42" dual delivery, power creel
1- 1996 Vouk SH82/D-3 draw frame, 20" X 42" dual delivery, power creel
2- 1994 Rieter SB-2 draw frames, 20" X 42" delivery, power creel
2- 1994 Rieter RSB-851 draw frames, 20" X 42" delivery, power creel
4- 1986 Rieter RSB draw frames, 20" X 42" delivery, power creel
D: COMBING:
1- 1994 Rieter E5/3 lap winder, 12" lap spools
2- 1994 Rieter E 60H combers, 24" X 48" cans
2- 1989/91 Rieter E7/5 combers, 24" X 48" cans
2- 1993/94 Rieter E7/5 combers, 24" X 48" cans
E. ROVING:
1- 1994 Marzoli BCX16E Roving frames, 84 spindles, 7" X 14"packages,
SKF PK 1500 drafting
4- 1994 Marzoli BCX16E Roving frames, 108 spindles, 7" X 14"packages,
SKF PK 1500 drafting
F. SPINNING:
8- 1994 Marzoli NSF3 link spinning frames, 1080 spindles e/o,
200 mm bobbins, 70 mm gauga, 42 mm dia ring, SKF Drafting, linked to:
8- 1994 Murata MC-7II link coners, 21 spindles e/o (max 22), 2-1/2
pitch drums, 4° 20' cones,
MMM Data system, G-1 splicers, Uster Polymatic with MK-20 heads,
auto doff, Magitex blower over each set
8- 1996 Marzoli NSF3 link spinning frames, 1080 spindles e/o, 200 mm
bobbins, 70 mm gauge, 42 mm dia ring, SKF Drafting, linked to:
8- 1996 Savio Espero, 23 spindles e/o, Mesdan 490C splicers, two
pitch steel drums, 4°20' cones, Uster Polymatic clearers,
MK-15 heads, Inspection Control, Wax, Magitex blower over each set
8- 1998 Marzoli NSF3 link spinning frames, 1080 spindles e/o, 200 mm
bobbins, 70 mm gauga, 42 mm dia ring, SKF Drafting, linked to:
8- 1996 Savio Espero, 23 spindles e/o, Mesdan 490C splicers, two
pitch steel drums, 4°20' cones, Loepfe clearers, KP 840 heads,
Inspection Control, Wax, Magitex blower
1- 1993 Murata Mach coner 7-II, 60 spindles, 4-3/4 clip cone delivery,
manual magazine feed, Uster D-4 clearers, MMM Data system,
48 spindles, 12 knotters, full length empty bobbin conveyor
G: LABORATORY:
1- Uster Tensorapid III
2- Twist testers
1- Uster Tester III, tensioner, sensor, conveyor line conditioner,
absorber, signal processor
1- Seriplane winder
OPEN END PLANT
1- 1988 Truetzschler BDT
1- 1993 Truetzschler AFC Axiflo
1- 1997 Truetzschler CVT4
1- 1999 Truetzschler Multimixer
1- 1992 Truetzschler Dustex
4- Truetzschler DK 715 cards with FBK 529 chute feeds
2- 1988 Ingolstadt RSB 51
2- Schlafhorst OE SE 8 with 216 positions, rotor 32 mm dia.,
cotton cards, 6" Take-Up
1- Schlafhorst OE SE 8 with 216 positions, rotor 32 mm dia.,
cotton cards, 6" Take-Up
TWISTING:
3- 1998 Mutara 363II Twisters, 154 Spindles each, 6" Traverse Take-Up,
4° 20' cones, Pot Depth 220 mm X diameter 160 mm
12- 1994 Mutara 363II Twisters, 154 Spindles each, 6" Traverse Take-Up,
4° 20' cones, Pot Depth 220 mm X diameter 160 mm
PACKAGE DYE DEPARTMENT:
2- Stainless Mixing Stations by Master, each consisting of:
1 ea. 33" Diameter x 30" Deep (400 Liter) tank with Mixer,
Steam Coils, Rinse Ring and Top Cover
4 ea. 18" Diameter x 28" Deep (100 Liter) Tanks, Rinse Ring
2 ea. 14" Diameter x 28" Deep (60 Liter) Tanks, Rinse Ring
1 ea. Setex Controller
1- Stainless Mixing Station by Master, consisting of:
45" Diameter x 35" Deep (600 Liter) tank with Mixer, Steam Coils,
Rinse Ring and Top Cover
2 X 22" Diameter x 28" Deep (100 Liter) Tanks, Rinse Ring
2 X 18" Diameter x 28" Deep (60 Liter) Tanks, Rinse Ring
2 ea. 14" Diameter x 28" Deep (60 Liter) Tanks, Rinse Ring
1 Setex Controller
1- 2001 Comix Horizontal Dye Machine, Model ROCCHE, Type POP/1100,
N.F. Nr. 172, 1650 Liters. 5-Bar Pressure, Vessel is 48" Sheet Length
x 40" Diameter, 4x6" Stainless Steel Pump and Motor, 23" Diameter
x 23" Deep Dye Add Tank, Sample Port on Side, Controller
1- 2001 Comix Table Top Sample Dye Machine, Model "Mini-ROCCHE",
Type MRR/4x4, N.F. Nr. 179, with 4-I-Bolt Kiers holding Four (4)
Packages each, Add Tank, Stainless Steel Pump and Motor, Controls
1- 1992 International Dye Machine Sample Dye Machine, N.B. No. 336,
SN: T-3649-A, Kier 20" Diameter x 21" Deep, Quick Lock Lid, Carrier
with 3-Spindles x 3-Packages, 9-Package Total Load, Stainless Steel
Pump and Motor, Beacon 121 Controller
1- Single Package Sample Dye Machine (? Manufacturer), Open Expansion Tank,
Pump and Motor, Controls
1- 2001 Comix Centrifugal Extractor Model SEL900, SN: 62-900101, 7.5 KW,
57 KG Maximum Capacity, approximately 30" Diameter x 16" Deep Basket
2- 1998 Master Package Dye Machine, Type BM-200+H, each with Open Expansion
Tank, Pump and Motor, Valves and Controller, 16-Bar Pressure @ 205 degrees
Centigrade, 2500 Liter. Kier 115 or 230 Package per Load
SN: 98/301332MI N.F. No: 451
SN: 98/310333MI N.F. No: 452
1- 1998 Master Package Dye Machine Type BM-500+H, SN: 98/310334,
N.F. No: 453, with Open Expansion Tank, Pump and Motor, Valves,
Controller, 16-Bar Pressure @ 205 Degrees Centigrade, 270 or 540
Package per Load
1- 1981 Obermaier "Turbostat 13" Package Dye Machine, No: 3670/3457,
approximately 200 Kg Capacity, 10-Bar Pressure @ 180 degrees Centigrade,
with Open Expansion Tank, Pump and Motor, Valves, Controller
1- 1980 Master Package Pressure Dryer, SN: 60273ML, N.F. No: 284, Kier 63"
Diameter x 93" Deep, Quick Lock Lid, 5-Bar Pressure @ 130 Degrees
Centigrade, Open Expansion Tank, Pump and Motor, Valves, Master Controller
CARRIERS:
10- 2x23 Spindle x 5-Package High, 40" Diameter (included with machines)
2- 2x54 Spindle x 5-Package High, 59" Diameter (included with machines)
2- 2x36 Spindle x 6-Package High, 49" Diameter (included with machines)
1- 2003 Comix Horizontal Package Dye Machine, Model POP1500, Type HT,
N.F. No: 206, rated 5-Bar Pressure @ 158 Degrees Centigrade, Kier Sheet
Length 123" x 52" Diameter, with Stainless Steel Pump and Motor,
Add Tank, Valves, Controller.
Has (4) Carriers with 35 Spindles x 5 Package High and (4) Carrier
Transport Carts
1- Krantz Centrifugal Extractor, 48" Diameter x 25" Deep, Rimless Stainless
Steel Basket
1- Package Shaper
1- 2000 Strayfield Radio Frequency Dryer, Type SSO 4OT, SN: 7-01-117,
40 KW Capacity, Frequency 27.12 MHZ, 440 Volts/3/60, 105 KVA
1- Waste Baler, 60" x 30" Size, Hydraulic Downstroke
AIR COMPRESSORS:
1- Atlas Copco GA75 Air Compressor
1- Atlas Copco GA45 Air Compressor
1- Atlas Copco Dryer FD-160
1- Atlas Copco Receiving Tank, 30" x 72" High
1- Sullair LS-16 Air Compressor, 75 HP, 230/460 Volts, with Receiving Tank
WARPING DEPARTMENT:
1- 1999 Karl Mayer Direct Warper, Type ZM-SP 1800/1000, SN: 12426, Karl
Mayer Creel, 840 Ends, Electronic Stop Motion, Hydraulic Tightenter
1- 1999 Karl Mayer Direct Warper, Type ZM-SP 1800/1000, SN: 16083, Karl
Mayer Creel, 812 Ends, Electronic Stop Motion, Hydraulic Tightenter
2- 1988 Murata 14-II Winder, 108 Positions, 6" Traverse, 4 Degree 20 Minute
Cone, Disc Tensions, 220 Volts, SN: 87SX468760-2, 87SX468760-1
1- 1982 Murata 14-II Winder, 108 Positions, 6" Traverse, 4 Degree 20 Minute
Cone, Disc Tensions, 220 Volts, SN: 8208157
1- 1986 Hacoba Sectional Warper, Model US-B/25, SN: 212386, 83-1/2" on Flat,
28-1/2" on Rise, 40" Diameter maximum Beam Flange, Yarn Comb, Hacoba
Creel G5-551, SN: 242369, 8-Package High on 9" Centers, 25 Rows x 2
with Magazine, Electronic Tension
1- 1998 Karl Mayer Sample Warper ROM ROT-O-MATIC, SN: 12275, 40" Diameter
maximum Beam Flange, Touch Pad Computer Controls, 8-IRO Galaxy Feeders
on Stand for up to 14 Feeders, Mayer Feeder Stand 1200L, Nr. FBW50110R,
maximum 8-Positions with 4-ROJ's mounted
1- Hergeth Sample Warper, No. 2710, 380 Volts/50, Section 1-5587/1,
380 Volts/50, 10-Position Feed Stand with 5-Technomatex Feeders
1- 1997 Karl Mayer BOM 2000 Band-O-Matic Sectional Warper, No: 12279,
80" on Flat, 54" on Rise, 118" between Heads, with Mayer Creel,
GDM 768, No: 14682, 840 Ends, Disc Tensions, Electronic Stop Motions
1- Giovanelli Sectional Warper, 40" Beam Diameter, Yarn Comb Stand,
Giovanelli 840 End Creel, 10-1/2" Center Distance, Electronic Stop Motions
1- Benninger Sectional Warper, 200 cm width, 840 End Creel, SN: 96755
3- SSM Winders, 12 Positions each, SN: 8280071-9, One Serial Plate Missing
1- 1997 Murata 7R-2 Mach Mini Winder, 10 Positions, 12 Pocket Magazine,
Uster Clearers, 440 Volts, Two Turn Steel Drums, SN: 345330-001
SLASHING DEPARTMENT:
1- 1996 Karl Mayer Rotal Slasher Type LD320/100, SN: 96174/1, 108" on
Delivery Roll, Dinax Computer Controls, Adjustable Comb, Leasing Section,
Tension Device with Waxing Tray, 10-Can Drying Section, Cans 93-1/2 wide
x 30" diameter, Two (2) Rotary Size Boxes, 4-Roll 2-Nip with 2-Pre Dry
Cans between Box 1 and 2, One (1) Rebeam Stand/Repair Stand, and
16-Position Beam Creel, Loading Hoist and Rail
1- 2000 Karl Mayer Rotal Slasher, Type ELC-O-TENS LD320/1000, SN: 0245/1,
111" on Delivery Roll, Computer Controls, Adjustable Comb, Leasing Sections,
Waxing Tray, 8-Can Dryer Section, 4-Size Boxes, 4-Roll, 2-Nip,
Single Beam Stand
2- Karl Mayer Rotal Size Kitchens, each with One (1) Cooking and One (1)
Storage Kettles, Mixers, Pumps and Valves, Controllers
WEAVING DEPARTMENT:
2- Ferber Warp Beam Trucks with Harness Arms, Type ET-2001, 2000 Kg
maximum Capacity, 24 Volt
Year: 1996 SN: A-3858
Year: 1997 SN: A-5610
1- Harness Truck (? Ferber)
1- 1997 ELM, s.p.a. "VEGA" Drawing-In Machine, Type K, SN: 138271132,
Heddles and drops and "VEGA" Knot-Point Machine, Type KPP, SN: 138271132A
1- 1997 Stimin Wax Melting Machine, Model "Hydrosonic"
84- 1996/98 Vamatex PI00I-ES Rapier Looms, 190cm Width, 8-Color Capacity,
Yarn Stand, 3 to 6 Feeders per Machine, Leno Device, Selvage Cutter,
6-Bank Stop Motion, On-Loom Take-Up, Vamatex IP55 Controls
40- 1998/99 Picanol Delta XF-2-P Looms, 190cm Width, 9-Lever maximum, 3 to
6 Harnesses Loaded, Yarn Stand, 1 or 2 Feeders each, Staubli Cam Box 1610 model
8- 2003 Picanol Gamma X-8-R Rapier Looms, 190cm Width 8-Color Electronic
Selector, 12 Lever maximum, Staubli 2670 Dobby, Leno Selvage, 6-Bank Stop
Motion, On-Loom Take-Up
4- Picanol Delta X-2-P Looms, 190cm Width, 7-Harnesses, 2-Feeders, Leno,
Selvage Cutter, Staubli 1610 Cam Motion, 6-Bank Stop Motion, On-Loom
Take-Up. (In Yarn Packing Area)
4- Picanol Delta XF-2-P Looms, 190cm Width, 6-Harnesses, 2-Feeders, Leno,
Selvage Cutters, Staubli 1610 Cam Motion, 6-Bank Stop Motion, One-Loom
Take-Up. (In Yarn Packing Area)
INDIGO DYE DEPARTMENT:
1- Panon Indigo Slasher Dye Range, consisting of:
a. 12-Beam Creel with 2-Ton Hoist and Rail
b. Panon Rubber/Stainless Draw-In Stand (Foulard No. 1), 2 Meters wide,
7.5 HP Drive Motor
c. Sulphur Box with Rubber/Stainless Nip Set (Foulard No. 2)
d. Two (2) Caustic Boxes with Rubber/Stainless Nip Sets (Foulard NO. 3 and 4)
e. Nine (9) Dye Boxes with Rubber/Stainless Nip Sets (Foulard No. 5 thru 13)
f. Ten (10) Can Drying Section, 30" diameter x 2 meter Cans
g. Panon Size Box, 4-Roll, 2-Nip, with Mixing and Storage Kettles,
Pumps, Motors and Controls
h. Ten (10) Can Drying Section, 30" Diameter x 2 meter Cans
i. 23-Roll Accumulator, 11-Rolls Up, 12 Rolls Down, approximately 120 meters
j. Draw Roll Set, Rubber/Stainless
k. Leasing Section
l. Adjustable Sheet Comb
m. Panon Slasher Headway, 106" on Delivery Roll, Tension Controls,
1 meter Beam diameter maximum, Computer Controls
n. Mahlo EMC-12 Moisture Control, No: 01-63-30/00530, 380 Volts, 50/60 Hz
o. Range Drive, All Motors, etc.
p. Color Kitchen with all Mix Tanks and Mixers, Pumps, Motors, Valves
and Controls
q. Two (2) Polyethylene Dye Tanks, One is 4,000 Gallons, One is 2,500
Gallons, Mounted on Gantry.
FINISHING DEPARTMENT:
1- Range No. 1, 80" Wide Tenter Range, consisting of:
a. Sky-In with E&L 11" Guiders, KF2020 on Bridge
b. 1996 Menzel Singer, 80SI, SN: 02186, 4-Burners
c. Stainless Steel Quench Tank
d. Evac Vacuum Extraction
e. Set Air Guiders on Bridge
f. 1971 Kuster Chem Pad Type 222.52.2400, SN: 10060811, with Vertical
Swimming Roll against Stainless Steel
g. AEG Straightener, Bow and Skein
h. STM Preheater on Gantry
i. Artos Tenter with Standard Knit Entry, 101" on Feed-In Roll, E&L Rail
Guiding, Horizontal Rails with Pin Chain, 6-Zone Gas Fired House, Cooling Zone
j. Silk City A-Frame Winder
k. All Motors, Blowers, Drives and Controls
1- Range No. 2, 80" Wide Tenter Range consisting of: |