REFERENCE NUMBER: G-1118
TAPE EXTRUSION AND WINDING LINE FOR SALE:
MATERIAL: PP / HDPE
GRAVITY: 0.91 KG/DM3
WARP TAPE WIDTH: 2.54mm
WEFT TAPE WIDTH: 2.54mm
WARP TAPE COUNT: 1000 TO 2000 DENIER
WEFT TAPE COUNT: 1000 TO 2000 DENIER
FLOWCHART OF PRODUCTION:
PP/HDPE YARN:
PP/HDPE ? DRYING MIXER + AUTO. FEEDER ? PLASTIC TAPE DRAWING MACHINE
? CAM-TYPE WINDING MACHINE
QUOTATION LIST :
(A) PLASTIC TAPE DRAWING MACHINE
MODEL: SJ-FS110/600B
(B) CAM TYPE WINDING MACHINE
MODEL: S-STL-II/150
REMARKS:
CHILLER AND COOLING TOWER CAN BE QUOTED SEPARATELY
FOR THE YARN EXTRUSION LINE, IF REQUIRED,
BOBBINS FOR YARN REWINDING CAN BE QUOTED.
SPARE PARTS: THE BUYER SHOULD CONSIDER ORDERING THEM FOR ONE-YEAR USE.
DRYING MIXER + AUTO. FEEDER: CAN BE QUOTED.
PLASTIC TAPE DRAWING MACHINE SJ-FS110/600B:
THIS MACHINE, USING MATERIAL OF PP & HDPE, THROUGH HEATING,
EXTRUDING AND DRAWING, MAKES TAPE THAT IS THEN WOUND ON
BOBBINS FOR CIRCULAR LOOM WEAVIN.
HAVING BEEN IMPROVED SO MANY TIMES, THE MACHINE CAN USE 100%
RECYCLED PP/PE GRANULES OR POWDER TO PRODUCE YARN.
THE SCREW AND CYLINDER ARE MADE OF NITRIDED 38CRMOA1A ALLOY STEEL,
THE HARDNESS OF WHICH CAN REACH OVER HV950.
HELICAL GEAR REDUCER ON THE EXTRUDER IS MADE OF 20CRMNTI ALLOY STEEL.
THE DRIVE ROLLERS ARE ELECTROPLATED WITH HARD CR.
SELF-CONTROL TENSION WINDING ROLLER INCLUDES THE TRACTION UNIT.
MOREOVER, THE BARREL, TEE FITTING AND DIE INCLUDES ALUMINIUM
CAST HEATER WHICH IS VERY DURABLE.
MAIN TECHNICAL SPECIFICATIONS:
MODEL: SJ-FS110/600B
EXTRUSION CAPACITY: 60KGS/HR
DIAMETER OF SCREW: 110mm
L/D RATIO OF SCREW: 23:1
ROTATIONAL SPEED OF SCREW: 25 TO 75R/MIN
WIDTH OF DIE LIP: 600mm
DRAWING RATIO: 4 TO 8
DRAWING SPEED: 50 TO 150M/MIN
THICKNESS OF TAPE: 0.0025 TO 0.08mm
NUMBER OF OVENS: 2
MOTOR POWER OF EXTRUDER: 22KW
HEATING POWER OF EXTRUDER: 33KW
POWER OF DRIVE MOTOR: 5.5KW
HEATING POWER OF OVEN: 15KW
FLOORSPACE DIMENSIONS (L×W×H): 13300×1250×1260mm
WEIGHT: 5000KG
CAM TYPE WINDING MACHINE S-STL-II/150:
THIS MACHINE, WITH 2.2-3KW MAIN MOTOR ONLY, IS OUR ENERGY-ECONOMY
INVENTION.
IT IS A CARDIOID CAM WHICH REPLACES THE FORMER RECIPROCATING-SHAFT
MECHANISM OF COMBINATION WINDING MACHINE.
ITS GUIDING AXLE IS WITH GCR15 BEARING STEEL AND THE GUIDING
PUSHING-BOARD IS MOVED BY THE MATCH BETWEEN LINEAR ROLLING BEARING
AND GUIDING AXLE.
IN THIS WAY, WITH ROLLING FRICTION FOR THE RECIPROCATING MOVEMENT,
THE MACHINE CAN ACHIEVE LESS ABRASION, STABLE MOVEMENT AND FLAT WINDING
SPINDLE. ITS OVERALL LENGTH IS GREATLY SHORTENED BY USING LAYERS
ON BOTH SIDES.
MAIN TECHNICAL SPECIFICATIONS:
MODEL: S-STL-II/150
LAYER NUMBER OF SPINDLES: 5
NUMBER OF SPINDLES: 150
DIMENSION OF BOBBIN (OD×L): 38×230mm
SPEED OF TAPE WINDING: 30-160M/MIN
POWER OF MAIN MOTOR: 2.2KW
POWER OF WINDING MOTOR: 7KW
FLOORSPACE DIMENSIONS (L×W×H): 4700×1500×1700mm
WEIGHT: 2800KG
POWER CONSUMPTION: INSTALLED POWER: 75.5
CAM TYPE WINDING MACHINE: INSTALLED POWER: 9.2
THE REAL CONSUMPTION IS 60% OF THE INSTALLED POWER.
INVENTORY NUMBER: E-5800
BARMAG STAPLE FIBER DRAWING SYSTEM:
MODIFIED FOR BLACK FIBER PRODUCTION IN 2001
EXTENSIVE NEW COMPONENTS
INSTALLED AND NEVER USED IN PRODUCTION
DOUBLE SIDED
WITH CREELS
CAPACITY PER DRAW LINE - 15 MILLION LBS/YR.
LINES EQUIPPED AS FOLLOWS:
TRIO UNIT
FINISH BATH
(2) SEVEN ROLL STRETCHING UNITS
PROCTOR & SCHWARTZ FIBER DRYING OVEN (45 FT LENGTH)
(2) 125MM CRIMPERS
LUMMUS FIBER CUTTERS
FIBER TRANSPORT SYSTEM
MURRAY FIBER BALE PRESS (PTI TYPE)
-DUAL BOX
CREELS AND TOW CANS AVAILABLE
EXTENSIVE SUPPLY OF FIBERGLASS CANS
QUANTITY: 1 LINE
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-5596
NEUMAG STAPLE FIBER EXTRUSION AND DRAWING SYSTEM-SHORT GAP:
2 STEP PROCESS
ESTIMATED PLANT CAPACITY- 30 MILLION POUNDS/YR. BASED ON 2000 LBS/HR PER EXTRUDER AT 92% EXTRUDER
AND SPINNING UTILIZATION AND 95% CONVERSION IN THE SPINNING AREA.
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-5118
BARMAG STAPLE FIBER DRAWING SYSTEMS:
DOUBLE SIDED
WITH CREELS
CAPACITY PER DRAW LINE - 15 MILLION LBS/YR.
LINES EQUIPPED AS FOLLOWS:
TRIO UNIT
FINISH BATH
(2) SEVEN ROLL STRETCHING UNITS
PROCTOR & SCHWARTZ FIBER DRYING OVEN (45 FT LENGTH)
(2) 125MM CRIMPERS
LUMMUS FIBER CUTTERS
FIBER TRANSPORT SYSTEM
MURRAY FIBER BALE PRESS (PTI TYPE)
-DUAL BOX
CREELS AND TOW CANS AVAILABLE
EXTENSIVE SUPPLY OF FIBERGLASS
QUANTITY: 3 LINES
(CLICK HERE FOR PICTURES)
INVENTORY NUMBER: E-2739
REIFENHAUSER EXTRUSION LINE FOR HIGH TENACITY EMBOSSED FILAMENT:
90MM EXTRUDER
SCREEN CHANGER
HEAD WITH 1500 DENIER AND STANDARD FILAMENT HEADS WITH DIES
WATER BATH
DRYER
GEARED ROLL STAND #1 WITH 7 ROLLS, STAINLESS STEEL
STRETCH OVEN 4 METER LONG, UPPER AND LOWER HEAT
GEARED ROLL STAND #2 WITH 7 ROLLS, STAINLESS STEEL
STRETCH OVEN, SINGLE
GEARED ROLL STAND #3 WITH 3 ROLLS, STAINLESS STEEL
EMBOSSER BY EXTRUSION SYSTEMS LTD (ESL)
12 - MACKIE TAKEUPS
OVERHAULED 2003
1. DIAMETER OF ROLLS 236MM
2. LENGTH OF ROLLS 1200MM (WORKING WIDTH 800MM)
3. ROLLS NOT HEATED.
4. WORKING WIDTH OF OVENS 930MM
5. LENGTH OF OVENS 4500MM AND 3500MM
6. MAXIMUM OPERATING TEMPERATURE 170 DEGREES C.
7. TYPE DESIGN OF EMBOSSER - MADE BY ESL
TYPE 3 SETS OF ROLLERS
ROUND GEAR TYPE
DIAMOND DESIGN
RUBBER
1 - FRAME WITH 3 INDIVIDUAL MOTORS, HEAVY AND AIR PRESSURE ASSISTED
INVENTORY NUMBER: E-1896
COMPACT PET STAPLE FIBER EXTRUSION LINE:
MECCANICHE MODERNE
CAPACITY: 200 POUNDS PER HOUR
SUCTION SYSTEM TO TRANSPORT CHIPS FROM FIRST FLOOR TO EXTRUDER
CHIPS FEEDING SYSTEM FOR EXTRUDER
EXTRUDER MECCANICHE MODERNE 5 HEATING ZONES
SCREEN FILTER AUTO EXCHANGE
METERING POLYMER PUMP
SPINNERETTE 300 MM OD DIAMETER
RADIAL QUENCH
QUENCH AIR FLOW CONTROLLING FAN
MONOMER EXHAUST
SPIN PACK HUDRAULIC CHANGER
FINISH APPLICATOR BY KISS ROLL
METERING FINISH PUMP
FINISH MAKE UP TANK
STAND TO INTRODUCE SEPARATE TOW FOR MIXING AT DRAW STAND
ONE TWO ROLL DRAW STAND ONE GODET OIL HEATED, DRIVEN BY MOTOR REDUCER
HOT GODET OIL BOILER TERMOTROL
ONE TWO ROLL DRAW STAND COLD, ONE GODET DRIVEN ONE GODET IDLER
"J" BOX STAINLESS STEEL FOR TOW ACCUMULATION
COMPLENSATOR STAND
TOW GUIDING CHANNEL
CRIMPER STEAM HEATED
TOW GUIDING TRAIN WITH 8 STATIC ROLLERS
NIP TENSION ROLLERS, TWO RUBBER COVERED
CIRCULAR TOW CUTTER LUMMUS LIKE
ELECTRICAL 480/3/60
ELECTRONIC AND DIGITAL CONTROLS FOR MOTOR SPEED, TEMPERATURE
QUENCH AIR, DRAW GODETS, CRIMPER AND CUTTER
COMPUTER MONITOR FOR COMPLETE LINE
LOT OF SPARES
MOST DOCUMENTATION
YEAR 1999
LIKE NEW CONDITION
IMMEDIATE DELIVERY
(CLICK HERE FOR PICTURES)
- SOLD - E-1883 BARMAG (PP) TAPE EXTRUSION LINE:
TYPE FB 3
YEAR 1987
STILL IN PRODUCTION
EXISTING OUT OF:
1. VOLUMETRIC DOSING TYPE K-TRON 4 POSITIONS WITH AZO SUCTION UNITS
2. EXTRUDER DIAMETER 90 MM - L/D 30 -
WITH 5 HEATING ZONES - MOTOR 92 KW CYLINDE RZONE 1 - 5.7 KW
LONG LIFE FILTER 10.5 KW
3. DIE - LIP 106 CM - FILM WIDTH 96 CM - DIE HEATING ZONES:
NO 1 + 5 = EACH 2.43 KW - NO 2 + 4 = EACH 1.78 KW - ZONE 3 = 1.13 KW
4. WATERBATH: 3/4 M3
5. ONE SINGLE ROLLER - 1.7 KW
6. FIRST SET GODETS: 3 ROLLERS LENGTH 1100 MM X DIA 200 MM
WITH PRESSURE ROLL - 7 KW
7. TAPE SUCKING SYSTEM: 13 KW
8. 2 STRETCHING OVENS HEATING 15.6 KW - VENTILATION 7.5 KW
9. 1 FIBRILATOR ( YEAR 1997 )
10. 2ND SET OF GODETS: 7 ROLLERS 1100 X 200 MM - 28 KW
OF WHICH 2 X 2 HEATED ROLLERS WITH THERMAL OIL - 22.5 KW
11. 3ND SET OF GODETS - 3 ROLLERS 1100 MM X 200 MM
WITH PRESURE ROLLER
OF WHICH ONE WATERCOOLED ROLLER - 2.6 KW
13. TAPE SUCTION SYSTEM: 13 KW
14. 164 WINDERS - "BARMAG" TYPE EKS 5 - TRAVERSE 300 MM -
BOBBIN LENGHT: 330 X CORE 90 MM
|